Propeller 1

Propeller 1 discussion for all applications, hobby or commercial.

Discussion	Started By	Replies	Views	Most Recent
BE Micro CV is on its way! 1 2 3	Rsadeika 2014-08-08 04:38	62	3.5K	abecedarian 2014-08-18 21:43
Real Time Clock	Discovery 2014-08-10 19:52	14	985	Discovery 2014-08-18 18:24
Adding things to your DE0/P1: Nokia 5110 LCD, etc	Cluso99 2014-08-18 18:08	1	588	Cluso99 2014-08-18 18:08
USB interface question	retromicro 2014-07-11 08:57	11	1.4K	Cluso99 2014-08-18 16:54
Verilog questions re variable cog ram size	Cluso99 2014-08-17 17:50	6	863	Cluso99 2014-08-18 14:01
PE Kit Tools - Debug LITE for the Parallax Serial Terminal	Andy Lindsay (Parallax) 2009-05-04 02:36	10	7.7K	Powersoft 2014-08-18 03:16
PBAS with VGA.spin und die VGA_Text.spin	funkheld 2014-08-18 01:45	1	219	funkheld 2014-08-18 01:45
Programming in Tachyon	David Betz 2014-08-17 15:17	5	460	Peter Jakacki 2014-08-17 19:50
BEMicroCV Stands and Proto Base Board	Kerry S 2014-08-17 11:32	5	583	Tubular 2014-08-17 17:09
Active High Button with 5V	Duane Degn 2014-08-17 13:17	6	428	Peter Jakacki 2014-08-17 16:15
happy coincidence - prototype board for the BE MICRO CV	Bill Henning 2014-08-17 13:38	1	326	Bill Henning 2014-08-17 13:38
Hub Exec?	David Betz 2014-08-17 05:03	8	440	David Betz 2014-08-17 13:21
Propellor Loader links	jmg 2014-08-17 13:13	1	207	jmg 2014-08-17 13:13
Question: Propeller architecture in ? family? 1 2...4 5	mklrobo 2014-08-11 14:12	145	5.5K	rod1963 2014-08-17 13:03
Additional counters per cog - any showstoppers?	pmrobert 2014-08-16 18:31	7	469	abecedarian 2014-08-17 09:12
Pass value in phsa?	lardom 2014-08-17 08:43	1	226	lardom 2014-08-17 08:43
Here are the files needed for running P8X32A on the BeMicroCV	cgracey 2014-08-10 17:43	30	1.9K	David Betz 2014-08-17 07:40
P1 Hardware Vrs P1 FPGA - Oscillscope Outputs >>> Frequency Synthesizer demo v1	Bob Lawrence (VE1RLL) 2014-08-15 20:09	7	692	Lawson 2014-08-17 06:59
Anybody know of ...	richaj45 2014-08-14 18:43	12	736	Tubular 2014-08-17 03:33
Software done? PASM Mandelbrot, Monitor/Hex editor, 3D engine, Chip16 Emulator?	overclocked 2014-08-13 14:04	20	1.3K	Baggers 2014-08-17 02:54
Super-COG with >2KB Cog RAM	Cluso99 2014-08-16 17:01	7	575	Heater. 2014-08-16 22:08
WooHoo!!!! - PortB - Clean Room Attempt	mindrobots 2014-08-14 12:22	11	906	User Name 2014-08-16 20:30
How to communicate with unknown I2C device? 1 2	sccoupe 2014-08-13 05:34	34	3.7K	sccoupe 2014-08-16 17:56
Small V-Prop: 2 Cog's, 4 KB ROM, 4KB Hub RAM	nutson 2014-08-16 05:51	7	655	nutson 2014-08-16 09:22
DC22 Thoughts 1 2	JonnyMac 2014-08-09 10:16	39	2.8K	idbruce 2014-08-16 06:41
i2c Driver for DS3231 RTC in C	doggiedoc 2014-08-13 19:46	11	3.3K	RS_Jim 2014-08-16 06:28
Question for Chip re ROM code 1 2	Cluso99 2014-08-10 21:38	35	2.9K	Cluso99 2014-08-16 04:35
Connected SD card - how to make Kye's driver run slower?	pik33 2014-08-13 03:21	9	711	Peter Jakacki 2014-08-15 22:31
Capture Phase Edges at 17.46ns reolution using Prop Counters?	tonyp12 2014-08-15 19:00	3	301	tonyp12 2014-08-15 19:59
DE0 - P8X32 Pin Mappings	mindrobots 2014-08-15 08:28	3	369	mindrobots 2014-08-15 08:55

Propeller 1

Discussion List