Propeller 1

Propeller 1 discussion for all applications, hobby or commercial.

Discussion	Started By	Replies	Views	Most Recent
Will this work?	Jack3 2014-01-28 17:15	10	596	Jack3 2014-01-29 15:05
Direct interfacing of CD4000 logic powered at 3.3v to the Propeller?	LoopyByteloose 2014-01-28 00:01	8	1.6K	jmg 2014-01-29 11:53
PASM 101 - Manipulation I/O Pins 1 2	MJHanagan 2014-01-12 06:52	36	4.8K	Erlend 2014-01-29 11:31
passing an array	Jonathan 2014-01-29 10:11	3	221	Jonathan 2014-01-29 10:29
Blocky for Propeller?	Rayman 2014-01-28 13:07	9	1K	Rayman 2014-01-29 05:21
struct command?	ohVaNiLLaGoRiLLa 2014-01-28 10:36	2	237	Phil Pilgrim (PhiPi) 2014-01-28 10:48
Altimeter using a Accelerometer and Barometer	Shawna 2014-01-25 13:07	10	870	Graham Stabler 2014-01-28 07:57
Waitvid instruction - short delay between it?	John A. Zoidberg 2014-01-26 05:12	15	903	ericball 2014-01-28 05:37
More than one cogs running xmm code. 1 2	aldorifor 2014-01-21 04:17	46	2.9K	RossH 2014-01-27 16:29
National Instruments LABVIEW Software works Mydaq, with does it work with Propeller?	Vidur Sood 2014-01-27 15:51	2	299	Vidur Sood 2014-01-27 15:53
Using array of longs in PASM	maroy 2014-01-27 11:13	2	199	tonyp12 2014-01-27 11:26
Max 485?	electromanj 2014-01-26 13:44	9	1.8K	LoopyByteloose 2014-01-27 09:46
Issue w/audio chip TSV912IDT as seen on PropBOE	Tymkrs 2014-01-25 23:48	6	464	Ttailspin 2014-01-27 09:29
TI release uln2003lv	jmg 2012-04-23 05:34	17	3.1K	tonyp12 2014-01-27 08:47
Input pins P16..P23 on QuickStart Board	MJHanagan 2014-01-25 17:34	8	943	MJHanagan 2014-01-26 17:15
pushing and pulling crystal's frequency	Basher 2014-01-26 16:02	4	1.4K	jmg 2014-01-26 17:07
How to divide a clock input?	T Chap 2014-01-26 09:41	7	409	jmg 2014-01-26 15:10
Brad Campell BST on MacOS 10.6.8, no source window	Bart Fox 2014-01-26 00:53	6	806	Heater. 2014-01-26 11:59
Assembler not consistent with pre-processor macros	DavidZemon 2014-01-25 11:18	14	860	DavidZemon 2014-01-25 15:43
polulu ir beacon level shift	stargazer2050 2014-01-23 10:56	6	365	JonnyMac 2014-01-25 08:01
Where can I find a proto board that mates with Martins DNA board?	Don M 2014-01-23 17:57	8	490	Bill Henning 2014-01-25 07:18
in C, anything like PBASIC/BS2 TerminalN to accept from keyboard?	John Kauffman 2014-01-22 11:49	17	1.3K	Heater. 2014-01-25 05:31
pfth Forth -- How to deploy multiple cogs, a new revision	LoopyByteloose 2014-01-25 04:38	1	152	LoopyByteloose 2014-01-25 04:38
Use a variable to control the Little Step-U	Podion 2014-01-15 07:54	4	467	Podion 2014-01-24 20:06
Spin Tool Question?	electromanj 2014-01-23 17:03	6	506	electromanj 2014-01-24 16:13
C3 and SD 1 2	Rsadeika 2013-12-08 15:37	39	3.3K	David Betz 2014-01-24 11:16
Accessing I/O Pins in Secondary Cogs, SimpleIDE	evil_aaronm 2014-01-23 22:45	4	351	evil_aaronm 2014-01-24 07:37
problem __enable_spi_locking_ret not being defined from xmm model	Mike Petry 2014-01-23 10:33	7	626	David Betz 2014-01-24 06:40
ppBridge: Propeller Platform proto board with 10pin module support (STILL AVAILABLE)	Bill Henning 2011-04-27 19:53	13	2.9K	Bill Henning 2014-01-23 20:04
VS1053 + mSD to run mp3 on its own	Erlend 2014-01-18 07:44	13	1.5K	localroger 2014-01-23 19:09

Propeller 1

Discussion List