That is the one downside to having a table. Unless you bring along a friend you are pretty much tied to your sales table.
I had no problem what so ever with "evaporatoring" products, so I wouldn't wory too much about it.
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Does that byte of memory hold "A", 65, $41 or %01000001 ?
Yes it does...
Hi Again,
I received a RSVP so Im good to go.
Is everyone staying at the Comfort Inn?
Can I get some info on where it is and see if I can snag a room at this late date?
Ill be driving in from Louisville KY on Friday, and heading back to NH on Sunday (14hr trip) if it helps anyone Ill have an empty seat.
If there arr any hams in the group, is there a repeter in the area?
I don't know about anyone else, but I will be staying at the Comfort Inn. Their lobby is the gathering site for Friday supper if anyone is interested. I'll be there at 6:00 and wait a while before I leave.
6:00 might be a little early yet for some ... our flight for example doesn't get in until about 5:00 and between the drive and picking up a rental car I should be just rolling in at around 6:00 or sometime after.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ Beau Schwabe
IC Layout Engineer
Parallax, Inc.
Hi Beau,
I assume yoiur flying into Cleveland?
It is about 50 miles from·Cleveland Airport to the Comfort Inn in Milan.
It is at exit 118 on the Ohio Turnpike (I80-90).
The rental cars are a 10 min bus trip from the airport.
My guess is you will make it there around 7:30
I have flown into and driven through Cleveland many, many times.
It will be nice to meet you and all·the fellow Stamper/Proppers.
Unfortunately it looks like I won't be able to make UPEN this year :-(
I have to work on the last of the documentation and the VGA256 drivers
GadgetGangster will be there, and he will have some Morpheus and Mem+ boards for sale.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full Morpheus & Mem+dual Prop SBC w/ 512KB kit $119.95, 2MB memory IO board kit $89.95, both kits $189.95 www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller
I'm still waiting for more info on my travel schedule, but it's looking like I can make it. I'll be sure to RSVP by tomorrow. It'll likely be me and a friend arriving early on Saturday.
I don't have anything to sell, and I don't really have anything to show off, but I was thinking about bringing some of my projects along to show if we get chatting and anyone wants to see... will there be any spare tables around for us to just set up temporarily at? I'd probably just leave them in my car most of the time since I really don't want to man a table... I just want to hang out and share ideas with others. Oh, and is anyone printing up nametags so we know who everyone is?
microcontrolled said...
Question: Do we put up a sign or something at our table indicating who we are and what we are selling/trading/showing off?
Just look for the table with all the geeks sitting at it [noparse]:)[/noparse]
Wouldn't that be all the tables?·
I think I will make a sign, I could make a really big one because we are redoing our kitchen and we have a bunch of big, flat cardboard boxes that the cabnets come in. However, if I do make one, it would have to be decently small to fit in the car.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ Computers are microcontrolled.
Robots are microcontrolled. I am microcontrolled. But you·can·call me micro.
If it's not Parallax then don't even bother. · I have changed my avatar so that I will no longer be confused with others who use genaric avatars.
OK, lets revise plans a little for Friday evening. How about 7:00 in the lobby of the Comfort Inn Cedar Point South? Is this OK with you Jeff, or should we move the location up to Norwalk? I'll be the chunky guy with the grey beard and the growling stomach! Only kidding, I'll have a snack to help me wait.
Jeff, you should already have my cell phone number, if not, I can resend it.
I think that it is the Econolodge. You mean the one we both stayed at last year along with a lot of other guys and a bunch of hound dogs?
I decided to stay at the Comfort Inn this year and spend the money I save at the Expo! It is only an 8 minute drive according to Mapquest and with my knees I wouldn't be walking anyway!
That's it! Expo Registration is Closed! We have 100 RSVP's!!!!
My office is quickly filling up with Expo door-prizes, raffle stuff, food supplies, etc, etc!
I've got two more major shopping trips to make this week and we are ready to go!
(Ever shop for dinner for 100+ people?? It's exhausting. [noparse]:)[/noparse] [noparse]:)[/noparse]
Aww... I just got home from work and was gonna RSVP... doh, I guess that's what I get for pushing it off until the end . I hope you guys (and gals?) have a great time!
Comments
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Just call me micro.
If it's not Parallax then don't even bother.
·
I have changed my avatar so that I will no longer be confused with others who use genaric avatars.
Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
Cheap·shipping unless specified!··········150 left!!··
I had no problem what so ever with "evaporatoring" products, so I wouldn't wory too much about it.
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Does that byte of memory hold "A", 65, $41 or %01000001 ?
Yes it does...
·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Just call me micro.
If it's not Parallax then don't even bother.
·
I have changed my avatar so that I will no longer be confused with others who use genaric avatars.
Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
Cheap·shipping unless specified!··········150 left!!··
I have sent a registration E-mail twice and have not gotten a reply.
Time is getting short.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Alan Bradford ·N1YMQ
Plasma Technologies
Canaan NH 03741
www.plasmatechnologies.com
Thanks for double checking... I've got you on my list.. [noparse]:)[/noparse]
Must have been eaten by a spam filter somewhere..
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
I received a RSVP so Im good to go.
Is everyone staying at the Comfort Inn?
Can I get some info on where it is and see if I can snag a room at this late date?
Ill be driving in from Louisville KY on Friday, and heading back to NH on Sunday (14hr trip) if it helps anyone Ill have an empty seat.
If there arr any hams in the group, is there a repeter in the area?
Thanks,
Alan Bradford N1YMQ
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Alan Bradford ·N1YMQ
Plasma Technologies
Canaan NH 03741
www.plasmatechnologies.com
www.bestwesternohio.com/hotels/best-western-norwalk/
I can't guaranty the great room rate at this date. I would certainly ask.
The rate they quoted was good till the end of July.
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
Ron
I just reserved a room at the Comfort Inn and the pre tax rate is $69.
Looks like they have rooms available still.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Alan Bradford ·N1YMQ
Plasma Technologies
Canaan NH 03741
www.plasmatechnologies.com
6:00 might be a little early yet for some ... our flight for example doesn't get in until about 5:00 and between the drive and picking up a rental car I should be just rolling in at around 6:00 or sometime after.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Beau Schwabe
IC Layout Engineer
Parallax, Inc.
I assume yoiur flying into Cleveland?
It is about 50 miles from·Cleveland Airport to the Comfort Inn in Milan.
It is at exit 118 on the Ohio Turnpike (I80-90).
The rental cars are a 10 min bus trip from the airport.
My guess is you will make it there around 7:30
I have flown into and driven through Cleveland many, many times.
It will be nice to meet you and all·the fellow Stamper/Proppers.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Alan Bradford ·N1YMQ
Plasma Technologies
Canaan NH 03741
www.plasmatechnologies.com
Unfortunately it looks like I won't be able to make UPEN this year :-(
I have to work on the last of the documentation and the VGA256 drivers
GadgetGangster will be there, and he will have some Morpheus and Mem+ boards for sale.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Please use mikronauts _at_ gmail _dot_ com to contact me off-forum, my PM is almost totally full
Morpheus & Mem+dual Prop SBC w/ 512KB kit $119.95, 2MB memory IO board kit $89.95, both kits $189.95
www.mikronauts.com - my site 6.250MHz custom Crystals for running Propellers at 100MHz
Las - Large model assembler for the Propeller Largos - a feature full nano operating system for the Propeller
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
I don't have anything to sell, and I don't really have anything to show off, but I was thinking about bringing some of my projects along to show if we get chatting and anyone wants to see... will there be any spare tables around for us to just set up temporarily at? I'd probably just leave them in my car most of the time since I really don't want to man a table... I just want to hang out and share ideas with others. Oh, and is anyone printing up nametags so we know who everyone is?
DogP
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Just call me micro.
If it's not Parallax then don't even bother.
·
I have changed my avatar so that I will no longer be confused with others who use genaric avatars.
Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
Cheap·shipping unless specified!··········150 left!!··
No, that is a good idea.
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Does that byte of memory hold "A", 65, $41 or %01000001 ?
Yes it does...
·
Wish I were going to be there!·
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Whit+
"We keep moving forward, opening new doors, and doing new things, because we're curious and curiosity keeps leading us down new paths." - Walt Disney
I think I will make a sign, I could make a really big one because we are redoing our kitchen and we have a bunch of big, flat cardboard boxes that the cabnets come in. However, if I do make one, it would have to be decently small to fit in the car.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.
Robots are microcontrolled.
I am microcontrolled.
But you·can·call me micro.
If it's not Parallax then don't even bother.
·
I have changed my avatar so that I will no longer be confused with others who use genaric avatars.
Jeff, you should already have my cell phone number, if not, I can resend it.
Ron aka sailman58
What is that hotel that is right nearby within walking distance ?
Also what is the address of the place (for my GPS) ?
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Does that byte of memory hold "A", 65, $41 or %01000001 ?
Yes it does...
·
Another question: What is the educational value of going to the Expo? I hope there is one so I will get to go back......
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.
Robots are microcontrolled.
I am microcontrolled.
But you·can·call me micro.
If it's not Parallax then don't even bother.
I have changed my avatar so that I will no longer be confused with others who use generic avatars (and I'm more of a Prop head then a BS2 nut, anyway)
I think that it is the Econolodge. You mean the one we both stayed at last year along with a lot of other guys and a bunch of hound dogs?
I decided to stay at the Comfort Inn this year and spend the money I save at the Expo! It is only an 8 minute drive according to Mapquest and with my knees I wouldn't be walking anyway!
Ron
I didn't record the information on the Motel down the street from the expo.
It is rumored to be clean, but was a bit run-down looking.
@Microcontrolled,
The gym is quite large. I doubt we'll have any trouble using half of it. [noparse]:)[/noparse]
(Note attached pic)
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.
Robots are microcontrolled.
I am microcontrolled.
But you·can·call me micro.
If it's not Parallax then don't even bother.
I have changed my avatar so that I will no longer be confused with others who use generic avatars (and I'm more of a Prop head then a BS2 nut, anyway)
You are describing me, and I dont trhink we have met yet!!!!!!!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Alan Bradford ·N1YMQ
Plasma Technologies
Canaan NH 03741
www.plasmatechnologies.com
My office is quickly filling up with Expo door-prizes, raffle stuff, food supplies, etc, etc!
I've got two more major shopping trips to make this week and we are ready to go!
(Ever shop for dinner for 100+ people?? It's exhausting. [noparse]:)[/noparse] [noparse]:)[/noparse]
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.
DogP
PM me your information and I'll make you the tail of group.. [noparse]:)[/noparse]
OBC
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
New to the Propeller?
Visit the: The Propeller Pages @ Warranty Void.