Shop OBEX P1 Docs P2 Docs Learn Events
What cities have Propeller Groups? - Page 3 — Parallax Forums

What cities have Propeller Groups?

13

Comments

  • BillDerBillDer Posts: 33
    edited 2009-07-30 23:29
    Detroit Michigan here
  • pjvpjv Posts: 1,903
    edited 2009-07-31 04:23
    Hi All;

    I'm in Edmonton, Alberta Canada. Many other Canadians out there??

    Cheers,

    Peter (pjv)
  • w8anw8an Posts: 176
    edited 2009-07-31 04:27
    I'm in northwest Ohio. I have had no luck getting that Frappr map to work. And I cannot for the life of me figure out how to add myself to it. It just want's me to modify some Portland Oregon location.. Dunno whose that landmark is, but it surely isn't mine.

    Steve
  • Mike HuseltonMike Huselton Posts: 746
    edited 2009-07-31 10:06
    I am in austin, texas.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    JMH
  • SciNemoSciNemo Posts: 91
    edited 2009-07-31 12:23
    Chuckz said...
    If there are adult prop users in the Pennsylvania (Delaware Valley) area, I would love to hear from you.

    I'm not an adult, but I live in the Delaware Valley as well.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Not the fish.
    sites.google.com/site/bitwinproject/
  • tronsnavytronsnavy Posts: 70
    edited 2009-07-31 14:04
    Greetings all·from VA Beach, VA.· NOOB but know trons (US Navy).· Got a PE Kit on order.· Reading up on spin and asm.· This forum is great... lots of knowledge... but if someone is in the area, shoot a reply.· Have a great and save weekend.· Rock-On.

    Bob
  • MicrocontrolledMicrocontrolled Posts: 2,461
    edited 2009-07-31 14:22
    Our internet safty filter program blocked the Frapper Map. (believe it or not, for "Teastless/Gross , Bulliten Board [noparse][[/noparse]What?] , and Swimsuits!)

    I would still like to see where other propeller heads are.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Toys are microcontroled.
    Robots are microcontroled.
    I am microcontroled.


    If it's not Parallax then don't even bother. :-)
    ·

    Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
    Cheap·shipping unless specified!··········150 left!!··


  • bambinobambino Posts: 789
    edited 2009-08-01 03:11
    Curt said...
    (

    Checking in from Huntsville AL

    Curt

    )
    I'm in Dalton GA. No doubt your the closest I've seen. I usually don't get any closer than Ider, AL though.· Nice to Know!
  • DogPDogP Posts: 168
    edited 2009-08-02 05:44
    bambino said...
    Curt said...

    (
    Checking in from Huntsville AL

    Curt
    )I'm in Dalton GA. No doubt your the closest I've seen. I usually don't get any closer than Ider, AL though. Nice to Know!

    Are you controlling your carpet factory w/ the propeller? wink.gif

    I don't remember if I posted before, but I'm in the DC area (Manassas Park, VA).

    DogP
  • sailman58sailman58 Posts: 162
    edited 2009-08-02 13:43
    I am in Crownsville, MD, just outside of Annapolis.

    Ron
  • Matthew HMatthew H Posts: 23
    edited 2009-08-02 14:20
    microcontrolled said...
    ls there ANYONE in West Virginia??? (or willing to drive there anyway) smile.gif

    I'm in the Charleston area, just a few hours away! Maybe we can meetup some time.

    -Matthew
  • MicrocontrolledMicrocontrolled Posts: 2,461
    edited 2009-08-02 18:09
    AWESOME! I'll have to warn you though, I may be a bit younger then you expected! smile.gif

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Toys are microcontroled.
    Robots are microcontroled.
    I am microcontroled.


    If it's not Parallax then don't even bother. :-)
    ·

    Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
    Cheap·shipping unless specified!··········150 left!!··


  • Matthew HMatthew H Posts: 23
    edited 2009-08-03 01:31
    I'm only 16 myself, only 2 years older than you if I recall. I may not say much on the forums, but I do read a good bit of them.

    -Matthew
  • CassLanCassLan Posts: 586
    edited 2009-08-03 01:32
    Just an FYI, a NYC / NJ Prop Group has formed since the origin of this thread, details in my sig.

    Rick

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔


    NYC Area Prop Club

    Prop Forum Search (Via Google)

    ·
  • potatoheadpotatohead Posts: 10,261
    edited 2009-08-03 05:43
    PDX here too! Well, slightly outside of PDX, but not far.

    PM me and perhaps we can get together once in a while!

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Propeller Wiki: Share the coolness!
    Chat in real time with other Propellerheads on IRC #propeller @ freenode.net
    Safety Tip: Life is as good as YOU think it is!
  • nohabnohab Posts: 96
    edited 2009-08-03 10:44
    Stockholm, Sweden here.
  • bambinobambino Posts: 789
    edited 2009-08-04 01:38
    DogP said...
    (Are you controlling your carpet factory w/ the propeller?)
    Actually I am designing for the Artificial Turf industry! The Carpet mills can't pull their heads out of their PLC's long enough to accept a micro of any kind! Let alone something as new as the prop. That may change if the royalties on the PLC programmer suites keep uping the ainty! But for now it would cost them too much to make the switch, and retrain their maintance men to speak spin!
    Believe me, The prop could up our unemployment rate from 14% to 20% overnight if they started doing away with the PLCs around here!
  • cimplexcimplex Posts: 11
    edited 2009-08-04 02:35
    microcontrolled said...
    ls there ANYONE in West Virginia??? (or willing to drive there anyway) smile.gif

    I'm in SW VA, near (60) mi to Bluefield.

    -Joe
  • P!-RoP!-Ro Posts: 1,189
    edited 2009-08-04 03:38
    Matthew H said...
    I'm only 16 myself, only 2 years older than you if I recall. I may not say much on the forums, but I do read a good bit of them.

    -Matthew
    Every time I turn around there's another person 'bout my age. Lol, can't believe I thought I was one of few.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    PG
  • MicrocontrolledMicrocontrolled Posts: 2,461
    edited 2009-08-04 15:26
    Yea, I thought that there was only about 3 of us on here, but there is a LOT more!

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Toys are microcontroled.
    Robots are microcontroled.
    I am microcontroled.


    If it's not Parallax then don't even bother. :-)
    ·
    I have changed my avatar so that I will no longer be confused with others who use genaric avatars.

    Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
    Cheap·shipping unless specified!··········150 left!!··




  • AleAle Posts: 2,363
    edited 2009-08-04 20:27
    I wish I had Internet when I was 14 or 16... life would have been better (electronically speaking of course). I'm 34 now smile.gif. I got Internet back in '96 and used to browse Motorola'S site quite a bit. I was using HC11 and relatives at work,

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Visit some of my articles at Propeller Wiki:
    MATH on the propeller propeller.wikispaces.com/MATH
    pPropQL: propeller.wikispaces.com/pPropQL
    pPropQL020: propeller.wikispaces.com/pPropQL020
    OMU for the pPropQL/020 propeller.wikispaces.com/OMU
  • P!-RoP!-Ro Posts: 1,189
    edited 2009-08-04 22:33
    At least you got to go out more. Some thumb twittering kids these days are suffering from vitamin D deficiency. (and im glad to not be one)

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    PG
  • MicrocontrolledMicrocontrolled Posts: 2,461
    edited 2009-08-04 23:25
    The only thing that keeps me inside is electronics...... smile.gif

    And this forum!! smile.gifsmile.gif

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Toys are microcontroled.
    Robots are microcontroled.
    I am microcontroled.


    If it's not Parallax then don't even bother. :-)
    ·
    I have changed my avatar so that I will no longer be confused with others who use genaric avatars.

    Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
    Cheap·shipping unless specified!··········150 left!!··




  • AleAle Posts: 2,363
    edited 2009-08-05 04:48
    I didn't go out that much... I had a pc wink.gif

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Visit some of my articles at Propeller Wiki:
    MATH on the propeller propeller.wikispaces.com/MATH
    pPropQL: propeller.wikispaces.com/pPropQL
    pPropQL020: propeller.wikispaces.com/pPropQL020
    OMU for the pPropQL/020 propeller.wikispaces.com/OMU
  • P!-RoP!-Ro Posts: 1,189
    edited 2009-08-05 05:12
    Lucky u guys, I was out for a couple hours in the heat working on my robot. Got a lot done though, welding and all.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    PG
  • MicrocontrolledMicrocontrolled Posts: 2,461
    edited 2009-08-05 16:19
    Oh, what I could do if my mother would let me weld..........

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Toys are microcontroled.
    Robots are microcontroled.
    I am microcontroled.


    If it's not Parallax then don't even bother. :-)
    ·
    I have changed my avatar so that I will no longer be confused with others who use genaric avatars.

    Mini-Din/PS2 connectors are for sale! 5 for $1! PM me if you wish to make an order.
    Cheap·shipping unless specified!··········150 left!!··




  • P!-RoP!-Ro Posts: 1,189
    edited 2009-08-05 16:41
    I started off when I was a freshman. If you know anybody that can weld around you just ask them to convince your mother it is safe and let them teach you. When I weld on my bot I already have to take it elsewhere because I unfortunately do not have 600 bucks to buy a new machine.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    PG
  • Guns of FunGuns of Fun Posts: 26
    edited 2009-08-15 23:09
    Burleson(just south of Fort Worth), Texas here.
  • nicolad76nicolad76 Posts: 164
    edited 2009-08-15 23:51
    Hi all...I am italian but I live in Gillette, NJ....I do not know anybody in Italy using Propeller...what a shame....but I have seen that there is a group formed right in Jersey City....cool....I am going to check it out....let me find the link again....

    Ciaoooo
  • GranzGranz Posts: 179
    edited 2009-08-17 23:33
    Giemme said...
    I am from Zurich, Switzerland.

    .... the Pandemic effect of the Propeller flue

    Giemme,

    I like your avatar - the ZX-81 kit was my first computer (at least the first that was all mine). Fond memories - maybe I should look into a ZX-80/1 simulator on the Prop.

    Zurich is a bit far for me - I'm in Pittsburgh in Southwestern Pennsylvania in the USA. I'm not sure that I could make it to Erie on a regular basis - at least not yet.

    Microcontrolled,

    Where in WV are you located? If in the Panhandle, maybe my son and I could meet with you now and then (he is your age).

    Art

    Post Edited (Granz) : 8/17/2009 11:57:26 PM GMT
Sign In or Register to comment.