New 4.3" touchscreen LCD for Propeller: "used" screens almost free w/purchase.

Microcontrolled · 2009-10-14 19:00

Rayman said...

microcontrolled:· You can probably pay me PS2 jacks if you want [noparse]:)[/noparse]

YES!!!! I still have about 60-70 of these left over from the Expo.

· I also have about 375 8-pins I ordered by mistake.....

What is your PS2-to-screen ratio?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.

Robots are microcontrolled.
I am microcontrolled.

But you·can·call me micro.

Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·

Rayman · 2009-10-14 19:22

microcontrolled said...

What is your PS2-to-screen ratio?

I seem to recall 5 for $1...· So, that would be 25 per display...· And, you still would have to pay the $5 shipping...

But, I'll make you a deal...· I'll go 10 per display, if you pay the $5 shipping...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Rayman · 2009-10-14 19:32

Wow, I've got something like 7 orders already and I'm not even sure how to accept payment yet...
Here's what I'm going to try:
- You send me an email with what you want.
- I'll send you an invoice with your info and instructions on how to pay with Paypal or credit card.
- Once I see the payment, I'll ship your package.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

mctrivia · 2009-10-14 19:34

my email already sent have not herd back though.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Rayman · 2009-10-14 19:50

Sorry, I'm supposed to be working now! I'll try to take care of this tonight...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

mctrivia · 2009-10-14 19:55

i understand.

i am trying to finish up a 4 layer panel of pcb this week and this thread has been pretty distracting.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Microcontrolled · 2009-10-14 19:59

That deal sounds good, Rayman.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.

Robots are microcontrolled.
I am microcontrolled.

But you·can·call me micro.

Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·

Luis Digital · 2009-10-14 21:15

"Shipping within US is $5 (via USPS Priority Mail)"

How many UPS Ground (ZIP 33166)?

5 LCD

Thank you.

Rayman · 2009-10-14 22:18

Luis: Email me your order and shipping info and I'll send you an invoice and you can decide if you want to pay it...
I'll just use whatever price UPS says plus a dollar or two to cover the box...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Rayman · 2009-10-15 01:11

Wow, I really should be charging more! I already have requests for 50 of the 100 units I have on hand!
I'm a little overwhelmed right now...

Good news is that I think my shipping scheme is going to work, at least for domestic, still need to see how it goes with international shipping...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

jazzed · 2009-10-15 01:19

Just call it good will Rayman.

FireHopper · 2009-10-15 01:26

I think I'd be interested in one of the finished units [noparse]:)[/noparse]. so many new propeller things to buy, so little money!

Rayman · 2009-10-15 01:29

Now that I'm selling some displays for real, I suppose it's time to post some code...

Here's the source code for the "Paint!" demo that lets you draw on the screen in a few colors
using a stylus (see screenshot in top post):

It's probably not all that polished, but will give you something to get started with...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Microcontrolled · 2009-10-15 01:35

For 10 connectors a screen I'll take 3 or 4. PM me with order and payment details, and I'll check my PS2 supplys.....

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.

Robots are microcontrolled.
I am microcontrolled.

But you·can·call me micro.

Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·

mctrivia · 2009-10-15 01:57

Completed my order. $5 is a great price and I can see lots of places to put them at that price. $15 however limits places I can put it but still good price.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Rayman · 2009-10-15 12:49

I'm almost sold out of my box of 100...

I sure hope people realize that these are bare displays with just the FPC cable... You'll need some kind of board to make them work!

I'm working on a breakout board, but it's still a couple weeks away from mass production...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

mctrivia · 2009-10-15 13:33

If your schematic is right I can have 50-100 made for $200

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Rayman · 2009-10-15 14:33

Go for it! I'd much rather have someone else making, populating, and selling those things...
I'd really like to concentrate on PSB...
But, I felt sorry for all those poor LCDs being destroyed...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

mctrivia · 2009-10-15 14:41

then don't let them. At $5 I am sure you can sell thousands. I know early next year I am going to be looking for hundred or so cheap touch screens and I am sure more will also.

Since you are offering to sell the screens so cheap I am offering to design the breakout pcb for cost. If there are enough orders I can get them populated cheap also. I am not offering to sell these individually myself I have bigger products to work on.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Rayman · 2009-10-15 21:50

Thanks for all the orders everybody! Sorry if you haven't gotten a reply from me, but I'm swamped...
This is my first time selling things directly...
So far, I've only managed to get one package ready to ship [noparse]:([/noparse]
Hopefully, I get to everyone in the next couple days...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Microcontrolled · 2009-10-16 00:51

I still need to pay you... Is it OK if I pay you when the breakout board comes out? That way you can get it all in one shipping, and I know I will need a breakout board. I just wanted to reserve my screens before they are all gone!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.

Robots are microcontrolled.
I am microcontrolled.

But you·can·call me micro.

Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·

Rayman · 2009-10-16 01:06

Well, I got the first two orders boxed... That's some progress, right?

Microcontrolled: I'm not reserving any for anybody, but I'll try to make an exception for you since I could actually use some PS2 connectors [noparse]:)[/noparse]

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

James Long · 2009-10-16 01:27

This sounds like a cool deal to get into.

Rayman....are you considering to get more of the displays?

I could do a surface mount design (maybe mctrivia is considering us for assembly)......and get some breakout boards in the works.

MC, let me know if we were in on the consideration.

James L

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer

Lil Brother SMT Assembly Services

Please note: Due to economic conditions the light at the end of the tunnel will be turned off until further notice. Thanks for your understanding.

mctrivia · 2009-10-16 01:40

James I definetly would use you for assembly.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
propmod_us and propmod_1x1 are in stock. Only $30. PCB available for $5

Want to make projects and have Gadget Gangster sell them for you? propmod-us_ps_sd and propmod-1x1 are now available for use in your Gadget Gangster Projects.

Need to upload large images or movies for use in the forum. you can do so at uploader.propmodule.com for free.

Rayman · 2009-10-16 09:56

Sounds great guys.

I have heard that there are many, many more available. But, I haven't heard yet when I'll get another shipment...
I'm sitting on 50 of the "like new" variety, reserving them for my PSB board. But, it seems like people are more
interested in the lower cost of a "used" display...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Baggers · 2009-10-16 10:10

Rayman, did you get my email?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite

·

Microcontrolled · 2009-10-16 11:29

I will usually not buy from the forum, but I LOVE to work with displays and $5 for a 4.3" touchscreen?!?!!?! That is an offer too good to miss!!

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.

Robots are microcontrolled.
I am microcontrolled.

But you·can·call me micro.

Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·

Rayman · 2009-10-16 12:46

Baggers: Probably... Sorry if I haven't replied to everybody, I'm really swamped... Got many or so new emails to sort through...
I'm working on the first batch of orders right now and when I get those done,
I'll go through my email inbox again and send out invoices...

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
My Prop Info&Apps: ·http://www.rayslogic.com/propeller/propeller.htm

Baggers · 2009-10-16 13:22

ok [noparse]:)[/noparse]

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
http://www.propgfx.co.uk/forum/·home of the PropGFX Lite

·

kerryw · 2009-10-16 14:32

Rayman said...
Baggers: Probably... Sorry if I haven't replied to everybody, I'm really swamped... Got many or so new emails to sort through...
I'm working on the first batch of orders right now and when I get those done,
I'll go through my email inbox again and send out invoices...

Please keep me on the order list too Ray [noparse]:)[/noparse]. For some reason your invoices aren't making it to my e-mail account, but all of your e-mails are. Thanks!

Kerry

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"Heaven help me Marge, I'm just not that smart." - Homer Simpson

New 4.3" touchscreen LCD for Propeller: "used" screens almost free w/purchase.

Comments