Propeller 2

Primary purpose is for early adopters of Propeller 2, for the creation of programming tools, and for documentation development.

Discussion	Started By	Replies	Views	Most Recent
Problem with P2 Edge	iseries 2020-11-10 11:26	3	174	iseries 2020-11-10 15:15
Power Adapters for the P2 Edge Module Breadboard	CJMJ 2020-11-09 15:10	5	134	CJMJ 2020-11-09 22:00
Text to Speech	Rayman 2020-11-05 19:12	10	330	Rayman 2020-11-07 21:35
P2DIP40 (for existing P1 sockets) and P2DIL80 (for new designs) - updated schematic and USB case	Tubular 2020-10-06 22:56	19	695	Tubular 2020-11-07 02:50
P2 Live Forums: Requesting Presentations / Topics of all kinds!	Ken Gracey 2020-11-06 16:35	2	117	Alexander (Sandy) Hapgood 2020-11-06 19:32
Pulse Measurement (PASM2)	JonnyMac 2020-11-05 01:27	2	211	JonnyMac 2020-11-05 16:16
VGA - Chip's sample code	Cluso99 2020-11-03 02:44	10	272	evanh 2020-11-05 06:22
0.6" DIP compatible P2 without overhang - is it possible?	Peter Jakacki 2020-11-03 02:54	14	271	Cluso99 2020-11-05 05:11
FlexBASIC sample programs	ersmith 2020-11-04 16:32	2	144	Rayman 2020-11-04 18:56
Question on P2 breadboard work	photonverse 2020-11-01 02:34	19	617	msrobots 2020-11-04 04:24
Float question	bambino69 2020-10-30 13:44	19	506	JonnyMac 2020-11-03 21:43
1080p tile driver (P1 style) 1 2 3	Rayman 2020-01-27 19:40	68	2.4K	Wuerfel_21 2020-11-02 16:48
P2QT - P2+regs+Flash+uSD in a 68-pin 0.91" sq Quad "Fat" Pack	Peter Jakacki 2020-10-31 14:47	14	352	ErNa 2020-11-01 19:32
Can the separate voltage outputs from the P2 distributed regulators be tied together?	VBBSim 2020-11-01 09:25	2	120	jmg 2020-11-01 18:35
Is There A Better Way? Closed	JonnyMac 2020-10-30 02:45	25	474	Ken Gracey 2020-11-01 16:04
Noticed something funny on the P2 booting	Cluso99 2020-11-01 05:37	4	164	Cluso99 2020-11-01 09:37
Choosing a Touch screen LCD for usage with P2	thej 2020-10-26 20:58	16	374	tritonium 2020-10-30 14:53
Can the ADC be used in non-smartpin mode?	rogloh 2020-10-30 03:18	3	104	evanh 2020-10-30 04:23
Powering the P2 Edge Breadboard (AKA the "JonnyMac)	doggiedoc 2020-10-29 23:06	4	186	CJMJ 2020-10-30 01:21
P2 Edge and P2 Edge Breadboard (AKA the "JonnyMac) - PCBs arrived at Parallax	Ken Gracey 2020-10-21 21:07	23	989	AwesomeCronk 2020-10-29 22:46
Using LED Matrix as an 8 Channel Bar Graph Display	CJMJ 2020-10-29 05:24	0	95	CJMJ 2020-10-29 05:24
P2 Hardware Boards to link from MicroPython documentation	Tubular 2020-10-28 12:18	0	107	Tubular 2020-10-28 12:18
Trying to toggle pins in spin2	pilot0315 2020-10-25 18:47	4	301	pilot0315 2020-10-27 14:18
IMU based on lsm9ds1 9DOF Mems chip and Madgwick quaternion filtering	Rayman 2020-10-24 17:24	5	442	Circuitsoft 2020-10-26 03:26
FTDI EVE3 GPU --> VGA	Rayman 2020-10-13 22:36	9	708	Rayman 2020-10-25 01:44
3D graphics with small3dlib and FlexC	Rayman 2020-09-23 19:46	10	443	Rayman 2020-10-25 00:08
Repurposing laptop screen for P2 VGA - success	Cluso99 2020-09-01 01:06	14	466	Cluso99 2020-10-24 01:12
Propeller 2 GPIO Pin low level control and parrent pins	calm 2020-10-20 18:41	8	305	evanh 2020-10-21 14:55
P2 Edge Mini Breakout Board - Schematic and Pictures	Ken Gracey 2020-10-15 17:23	20	968	JRetSapDoog 2020-10-20 07:56
Proptool Library	bambino69 2020-10-16 15:44	3	234	bambino69 2020-10-19 09:12

Propeller 2

Discussion List