thank you very much TonyF! now i can finally move on from the bs2 to the prop. i have dug up some maxim DS and MAX·series chips that i have if anyone is interested in them, just pm me·and ill send them asap!·i think a couple of ds1620's and ds1302's. i will have to do an inventory to see what exactly i do have and will edit this post later with part #'s.
Wow! The generosity of Parallax and the Parallax community is amazing.
In that spirit, the first person to PM me with their name and address (international is Ok, too) will get a brand new, still in the shiny package, SX48 protoboard.
Happy Holidays everyone.
Ken
Edited: Gone now.
Post Edited (KenFordham) : 12/23/2009 4:31:59 AM GMT
you're very welcome Mike, your PropLAB is on it's way. I included a PropPlug with it in case you needed one. Check the spinvent PropLAB webpage for useful info. etc. I'll try to add some more stuff there before too long
Doing a little office cleaning I came across the three following items. All are brand new. One per person, first to claim them...PM please. Pictures below:
DU-BRO 4" pneumatic treaded tire set (2).
DU-BRO 4.5" aircraft tire set (2).
VEX 5" Wheel set (2).
I will mark them out as they are claimed and notify those who won here. Please PM me your full name and mailing address. I will ship them USPS.
Thanks again TonyF, i've already dove into the prop manual, big learning curve from the bs2, but im very eagar to start!
TonyF (spinvent.co.uk) said... you're very welcome Mike, your PropLAB is on it's way. I included a PropPlug with it in case you needed one. Check the spinvent PropLAB webpage for useful info. etc. I'll try to add some more stuff there before too long
Happy birthday to me, happy birthday to me, happy birthday dear meeee, happy birthday to me!
Okay, to celebrate my 40 somethingist birthday I am giving away the following;
1 Propeller Demo Board Microcontrolled - snagged off the freebie table at UPEW. One LED doesn't work, there is no breadboard and I cut out the audio portion. I think it still works but no guarantees.
1 New, unused Proto Board - not USB Claimed via PM
1 New, unused Proto Board - not USB Claimed via PM
1 Simple Servo Tester kit Claimed via PM
4 mini thumb sticks from SparkFun, without the press-on plastic "stick" part. They didn't work as well as I'd like so I found some higher quality ones.
They won't get shipped till after the holidays but hey, they're free!
If you want, I'll give you 500 LEDs for a protoboard as well.
Merry Christmas!!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ Computers are microcontrolled.
Robots are microcontrolled. I am microcontrolled.
But you·can·call me micro. Want to·experiment with the SX or just put together a cool project? SX Spinning light display· My overstock is killing me. PM me for absolutly FREE 8-pin Mini Din connectors.
Hi all, i still have these chips avaliable if anyone needs them, i'm sure someone has a project to use them on! just pm me your shipping address and ill get these in the mail asap. they are Maxim products, DS and MAX series.
I have a Propeller Platform where I put the pin sockets on backwards (pointing down). Works great otherwise, though - if anyone wants it, just PM me your address
Comments
Thanks,
Al
Dave
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Dave Andreae
Parallax Tech Support·
Dave,
The extremely fast shipping was definitely not needed. But it will put something under the tree
Hopefully I will be able to return the favor for Parallax and it's employees.
James L
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer
Lil Brother SMT Assembly Services
Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits. Learn to build your own Gizmos!
2-ds600u
1-max1270acng+
1-ds1620
1-ds1302+
1-max6965aee+
3-ds2450s
1-ds2408s
1-ds1267-100+
Post Edited (kf4ixm) : 12/24/2009 7:15:51 PM GMT
In that spirit, the first person to PM me with their name and address (international is Ok, too) will get a brand new, still in the shiny package, SX48 protoboard.
Happy Holidays everyone.
Ken
Edited: Gone now.
Post Edited (KenFordham) : 12/23/2009 4:31:59 AM GMT
metal taken
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
PG
Post Edited (Pi Guy) : 12/23/2009 5:46:00 PM GMT
DU-BRO 4" pneumatic treaded tire set (2).
DU-BRO 4.5" aircraft tire set (2).
VEX 5" Wheel set (2).
I will mark them out as they are claimed and notify those who won here. Please PM me your full name and mailing address. I will ship them USPS.
EDIT: 2 down, one to go!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Engineering
Check out the new Savage Circuits TV!
Post Edited (Chris Savage (Parallax)) : 12/23/2009 6:14:15 PM GMT
Okay, to celebrate my 40 somethingist birthday I am giving away the following;
1 Propeller Demo Board Microcontrolled - snagged off the freebie table at UPEW. One LED doesn't work, there is no breadboard and I cut out the audio portion. I think it still works but no guarantees.
1 New, unused Proto Board - not USB Claimed via PM
1 New, unused Proto Board - not USB Claimed via PM
1 Simple Servo Tester kit Claimed via PM
4 mini thumb sticks from SparkFun, without the press-on plastic "stick" part. They didn't work as well as I'd like so I found some higher quality ones.
They won't get shipped till after the holidays but hey, they're free!
PM me your shipping address!
Rich H
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
The Simple Servo Tester, a kit from Gadget Gangster.
Post Edited (W9GFO) : 12/23/2009 10:29:21 PM GMT
If you want, I'll give you 500 LEDs for a protoboard as well.
Merry Christmas!!
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Computers are microcontrolled.
Robots are microcontrolled.
I am microcontrolled.
But you·can·call me micro.
Want to·experiment with the SX or just put together a cool project?
SX Spinning light display·
My overstock is killing me.
PM me for absolutly FREE 8-pin Mini Din connectors.
Sure, why not! I'll add a third protoboard so that I can make that trade.
Rich H
p.s. Don't forget to PM me your address.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
The Simple Servo Tester, a kit from Gadget Gangster.
Post Edited (W9GFO) : 12/23/2009 10:59:09 PM GMT
2-ds600u
1-max1270acng+
1-ds1302+
3-ds2450s
1-ds2408s
1-ds1267-100+
Post Edited (kf4ixm) : 12/24/2009 7:15:06 PM GMT
I think the thread and event was pretty successful for an unannounced Christmas exchange.
I hope everyone who gave or received something has a new friend to whom they can converse with online.
To the few I gave items to, the items were sent Monday. They were sent first class. If you do not get them, please let me know.
I would like to thank Parallax for such great products and support. I also appreciate the gift that I received from them.
Thanks Tim for the ULN's......they will be put to good use.
With a thread view of over 1700, I think mostly everyone had a chance to see the thread (and hopefully participate).
Maybe next year more people will participate, and will be prepared to "tag" items for themselves.
Happy Holidays to my forum friends!!!!
James L
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
James L
Partner/Designer
Lil Brother SMT Assembly Services
Are you addicted to technology or Micro-controllers..... then checkout the forums at Savage Circuits. Learn to build your own Gizmos!
Happy Holidays All!
Spoken for [noparse]:)[/noparse]
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Propeller Forums RSS Feed!
Gadget Gangster - Share your Electronic Projects
Post Edited (Nick McClick) : 12/26/2009 4:27:02 AM GMT