Propeller 2 Developer Site

I did not find a thread about the
Propeller 2 Developer Site
https://propeller.parallax.com/
and
https://parallax.com/product/propeller-2
for questions and remarks
so I thought I start one.



Comments

  • PropGuy2PropGuy2 Posts: 260
    edited 2019-11-30 - 21:46:29
    Step #1 - How to set up the P2 Evaluation Board P/N 64000-ES Rev.B

    Introduction: >>>>>> I like documentation !!! <<<<<<
    Mount the rubber feet: As I have time I will fill in the blanks and add illustrations & documentation to these bullet points.
    Please feel free to edit and add additional comments, as needed, for someone / everyone who is new to the P2.

    Setting the DIP Switches:

    The 1v8 switching power supply:
    The LDO Vin 5v0 power:
    The ACC HDR 5v0:

    Setting the Jumpers:

    On-board memory 16MB chip:
    The microSD card:
    X0 and X1 crystal:
    Pins P56 to P63 and LEDs:

    Cabling the PC USB connector:
    Selecting an AUX 2-Amp USB power supply:
    USB 5v0 Power supply hook-up:

    Powering up the P2 Evaluation Board for the first time:
  • MJBMJB Posts: 1,160
    I don't know how those pages are maintained so my first observations go here:

    TAQOZ / Tachyon / Forth not listed in the software section
    but should definitely be there !!

    Tools
    Logic Analyzer
    SPLAT -
    https://www.dropbox.com/sh/n979flsb9rjoclo/AAD_eumipwsvwxCU7_-88SIBa/TAQOZ/More Forth/SPLAT.FTH?dl=0
    Quickly looking I could only find the Tachyon V4 version - in Peters P2 Dropbox
    but I thought @Peter Jakacki has been talking about it for TAQOZ
  • TAQOZ is mentioned twice on the 1st page: documentation and firmware section
    several times on the software page

    And you can submit any changes you like using the last link on the page

  • I think this is the section that MJB is talking about:
    Language Tools (Compiler & Interpreter)
    fastspin - P1 and P2 Spin, BASIC and C compiler by Eric R. Smith
    P1 Spin interpreter for P2 - by cluso99
    P1 Spin interpreter for P2 - by Dave Hein
    p2gcc, p2asm & loadp2 - P2 C compiler/assembler/linker/loader by Dave Hein
    Catalina - P1 and P2 C Compiler/linker by Ross Higson
    MicroPython - P2 microPython implementation by Eric R. Smith
    pyLoader - P2 binary loader written in python by ozpropdev

    Although TAQOZ is mentioned in firmware, that is only the tiny cut-down version that fits in ROM whereas the full-blown TAQOZ (RELOADED) is the version that gets loaded into RAM just like MicroPython but doesn't get mentioned there.
  • TAQOZ (RELOADED)

    yes - ROFL - yes.

    Mike
  • I think this is the section that MJB is talking about:
    ....
    Although TAQOZ is mentioned in firmware, that is only the tiny cut-down version that fits in ROM whereas the full-blown TAQOZ (RELOADED) is the version that gets loaded into RAM just like MicroPython but doesn't get mentioned there.

    Right, agree should be added :)
Sign In or Register to comment.