Shop OBEX P1 Docs P2 Docs Learn Events
H48C Tri Axis Accelerometer — Parallax Forums

H48C Tri Axis Accelerometer

SeariderSearider Posts: 290
edited 2009-09-09 11:02 in Accessories
Can someone confirm if the two rows of pins on the Parallax HC48C device are seperated by 3/10 of an inch?· I need to make a pattern for Diptrace tonight and I don't have one handy, and I can't find any mechanical drawings of it on the Parallax website.

thx

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔

Searider

Comments

  • SRLMSRLM Posts: 5,045
    edited 2009-09-09 01:11
    They should be standard spacing for breadboards (100 mil).
  • SeariderSearider Posts: 290
    edited 2009-09-09 02:01
    Yes, that is pin to pin in each row. but how far apart are the two rows ?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔

    Searider
  • W9GFOW9GFO Posts: 4,010
    edited 2009-09-09 03:48
    It looks to me like it is .5" from one row to the other.

    The dimensions given are .7" X .8".

    The spacing should be .1" from the board edge.

    7" - (2 * .1") = .5"

    28026-L.jpg

    Rich H

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    The Servo Boss, a 12 channel servo tester kit from Gadget Gangster.

    Post Edited (W9GFO) : 9/9/2009 3:54:52 AM GMT
  • Beau SchwabeBeau Schwabe Posts: 6,547
    edited 2009-09-09 05:12
    Searider,

    Yes, it is 0.5"

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Beau Schwabe

    IC Layout Engineer
    Parallax, Inc.
  • SeariderSearider Posts: 290
    edited 2009-09-09 11:02
    Thanks Everyone.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔

    Searider
Sign In or Register to comment.