H48C Tri Axis Accelerometer
Can someone confirm if the two rows of pins on the Parallax HC48C device are seperated by 3/10 of an inch?· I need to make a pattern for Diptrace tonight and I don't have one handy, and I can't find any mechanical drawings of it on the Parallax website.
thx
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Searider
thx
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Searider
Comments
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Searider
The dimensions given are .7" X .8".
The spacing should be .1" from the board edge.
7" - (2 * .1") = .5"
Rich H
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
The Servo Boss, a 12 channel servo tester kit from Gadget Gangster.
Post Edited (W9GFO) : 9/9/2009 3:54:52 AM GMT
Yes, it is 0.5"
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Beau Schwabe
IC Layout Engineer
Parallax, Inc.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Searider