I need help

Comments

• MacGeek117 Posts: 747

  2005-01-15 16:03 edited 2005-01-15 16:03

  Oh, by the way I need the circuit for a L293D chip. I can't find it on the search fuction.
  bugg
  
  ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
  So many projects, so little time.
• Jon Williams Posts: 6,491

  2005-01-15 19:39 edited 2005-01-15 19:39

  Google is your friend ... embrace it. I found lots of circuits on the web using Google, some of the using BASIC Stamp code.
  
  ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
  Jon Williams
  Applications Engineer, Parallax
  Dallas, TX· USA
• Andy Lindsay (Parallax) Posts: 1,919

  2005-01-18 05:49 edited 2005-01-18 05:49

  Regarding the IR Boe-Bot program, the first thing to do is break the problem down into simpler parts. Make sure your Boe-Bot works without the aid of the IR Remote, then make sure the IR remote works without the aid of the Boe-Bot. Then, you can decide which problem to examine more closely. I would run a test navigation program from Robotics with the Boe-Bot to make sure the Boe-Bot is working. If it is, then run a test program from earlier in IR Remote for the Boe-Bot and make sure the BASIC Stamp is actually receiving the correct messages from your remote.
• MacGeek117 Posts: 747

  2005-01-18 23:23 edited 2005-01-18 23:23

  I got it to work-I connected the detector to the wrong pin.
  bugg
  
  ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
  So many projects, so little time.