Shop OBEX P1 Docs P2 Docs Learn Events
Rev. C Chip on Rev. B Development Board? — Parallax Forums

Rev. C Chip on Rev. B Development Board?

Duane DegnDuane Degn Posts: 10,588
in Propeller 2
I'm pretty sure we have one of the 90 chip trays heading our way.
I'd like to validate software with the Rev. C chip before building our own PCB.
Is there any reason a Rev. C chip won't work on a Rev. B Development board?

I'm planning on carefully removing the Rev. B chip and replace it with one of our Rev. C chips. I'd use ChipQuik to minimize the danger to the PCB.

Am I missing some reason why this would be a bad idea?

Comments

  • Ken GraceyKen Gracey Posts: 7,386
    There is no reason a Rev C chip shouldn't work on a Rev B development board.

    I don't think you are missing anything. The changes to the die were nearly insignificant and for A/D improved performance.

    Ken Gracey
  • evanhevanh Posts: 15,257
    Yep, fine to do. Only change is paired pinB to ADC is cut to eliminate small cross-talk-like interference on the ADC.
  • VonSzarvasVonSzarvas Posts: 3,297
    Indeed. No problem to make the swap.
  • Duane DegnDuane Degn Posts: 10,588
    evanh wrote: »
    Yep, fine to do. Only change is paired pinB to ADC is cut to eliminate small cross-talk-like interference on the ADC.

    Our design will be using the ADCs on the P2. The Rev. B would like work fine but I'm not positive the cross-talk issue won't be a problem for our application.

    I'm not sure I'll swap the chip but it's good to know this is an option.

    Thanks everyone.
Sign In or Register to comment.