BS2PX comm speed question

SN96

I have a Basic Stamp 2px and was wondering if it can communicate at 38.4k baud? I have a servo controller that can communicate @ 2400, 9600 and 38.4k baud. The BS2px works fine @ 9600 baud but would like to use 38.4k if it can do it.

Thanks,

Mike

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Mike





Post Edited (SN96) : 12/27/2007 3:22:40 PM GMT

Mike Green

It sort of depends on how you do it. The STRSP modifier that references the scratchpad RAM seems to allow reception at 38.4KB, but some of the other formatters/modifiers may not be able to keep up. You'll need to experiment or stick with 9600 Baud.

SN96

The BS2px does communicate @ 38.4k baud and does very well. I have tried it with the servo controller that I am using and it works fantastic. I have provided a video demonstrating the BS2px working with the servo controller, and the biped bot that I have is a work-in-progress, so it only has one incomplete arm.


http://www.youtube.com/watch?v=IZwbjml2FmU

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Mike



·

Dave-W

The BS2px does communicate @ 38.4k baud and does very well. I have tried it with the servo controller that I am using and it works fantastic. I have provided a video demonstrating the BS2px working with the servo controller, and the biped bot that I have is a work-in-progress, so it only has one incomplete arm.


http://www.youtube.com/watch?v=IZwbjml2FmU

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Mike

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
D. A. Wreski

SN96

Thanks Dave,

Happy face? he's happy, can't you see the smile?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Mike



·