Shop OBEX P1 Docs P2 Docs Learn Events
Urgent!! Having problems with basic stamp for mac — Parallax Forums

Urgent!! Having problems with basic stamp for mac

ramonfiuramonfiu Posts: 1
edited 2007-12-03 05:34 in BASIC Stamp
HI GUYS IM NEW AT THIS FORUM, I CAME HERE BECAUSE I AM HAVING PROBLEMS WITH MY PROGRAM OF BASIC Stamp Macintosh Editor - Version 2.0b7, AND IT DOESNT SEEM TO READ THE SERIAL PORT CONNECTED TO MY MICROCONTROLLER SO I AM UNABLE TO PROGRAM MY BEO-BOT!!!

SUGGESTIONS, HELP,, ETC. THANK YOU ALL IN ADVANCE.!

Comments

  • Mike GreenMike Green Posts: 23,101
    edited 2007-12-03 05:34
    You need to give more information and specific information if you want a specific answer.

    Make sure you have the current FTDI driver installed on your Mac. Go to FTDI's website (www.ftdichip.com/FTDrivers.htm) and select the driver that's appropriate for your Mac. This assumes you have a USB BoeBot or a Parallax USB to Serial adapter. If you're using some other company's USB to serial adapter, you will have to have the driver for that (from the manufacturer). Not all USB to serial adapters will work with a Stamp.
Sign In or Register to comment.