Shop OBEX P1 Docs P2 Docs Learn Events
Tracks - Page 2 — Parallax Forums

Tracks

2»

Comments

  • Blackbird455Blackbird455 Posts: 124
    edited 2007-09-27 12:52
    OoOoOoO I like the sound of that Bill. Give it that "california rake" where the centerline of the crank (engine and tranny) are nose up at like 20*.

    That·might help your pinion angle if you had a lift on it.

    You could probablly goto a track somewhere and talk to some crews about getting their broken belts , cause new they are kinda high.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Noli nothis permittere te terere
  • cuzinitcuzinit Posts: 6
    edited 2012-09-27 15:53
    Gates makes belts up to 4" wide and 120" long they can be expensive but no more than some of the tracks I have seen The want a good price for the pullies that are gray iron. They have some Made out of aluminum 10" wide so you could cut to width. and drill the center hole. Check out thier web site. It looks to me like you will need close to 8' of track at a guess. I am tracking a powerchair and figure a 6' to 8' track I can adjust to the size.
  • davejamesdavejames Posts: 4,047
    edited 2012-09-27 19:18
    cuzinit - welcome to the Forum.

    Please note that the referenced thread is now 5 years old.
  • ercoerco Posts: 20,260
    edited 2012-09-27 19:27
    @dj: Then there's not a moment to lose! :)
  • RDL2004RDL2004 Posts: 2,554
    edited 2012-09-28 07:19
    They really should implement something like this:

    attachment.php?attachmentid=95880&d=1348841844
Sign In or Register to comment.