The problem is that I am trying to make a Dallas weather station work, and it only has 2 wires coming out from it. I can see how to hook up a 1W temp. sensor for example, but am still mystified as to how this dang weather station is supposed to work.
Jonathan
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔ www.madlabs.info - Home of the Hydrogen Fuel Cell Robot
I'm wondering if Jonathan was ever successful in getting his WS-1 to work?
I've been tinkering a bit with mine and have recently purchased some DS18S20 parts that I'll try to get working in parasitic mode. This mode (I think) is the key with the WS-1, hence only having the RED and GREEN wire. If I can get the DS18S20 part to work in parasitic mode, then it shouldn't be too far of a leap to make the WS-1 work, unless something in the WS-1 has stopped working!
Comments
Jonathan
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
www.madlabs.info - Home of the Hydrogen Fuel Cell Robot
I've been tinkering a bit with mine and have recently purchased some DS18S20 parts that I'll try to get working in parasitic mode. This mode (I think) is the key with the WS-1, hence only having the RED and GREEN wire. If I can get the DS18S20 part to work in parasitic mode, then it shouldn't be too far of a leap to make the WS-1 work, unless something in the WS-1 has stopped working!
Will post my results as I go.
Michael
K6MLE