Shop OBEX P1 Docs P2 Docs Learn Events
please test my online PROP — Parallax Forums

please test my online PROP

Franz AchatzFranz Achatz Posts: 140
edited 2007-08-27 16:56 in Propeller 1
Hi freaks,
could you please have a look at this internet enabled PROP (easyPROP with ENC28J60):

http://213.84.77.105

Its just for testing smilewinkgrin.gif

thanks
Franz

Comments

  • Graham StablerGraham Stabler Posts: 2,507
    edited 2007-08-15 16:01
    So was that page running on the propeller?
  • Graham StablerGraham Stabler Posts: 2,507
    edited 2007-08-15 16:01
    If so let us control an led [noparse]:)[/noparse]
  • ColeyColey Posts: 1,110
    edited 2007-08-15 16:03
    worked for me Franz, well done!!!

    Regards,

    Coley
  • deSilvadeSilva Posts: 2,967
    edited 2007-08-15 16:17
    Franz, please add a visitor counter!
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2007-08-15 16:29
    I was just looking at the specs for that chip last night! Well DONE!
    Any chance you'll publish a schematic we can put in the Cookbook?

    Oldbitcollector

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    The comments and code above are proof that a million monkeys with a million propeller chips *could* write Shakespeare!
  • AleAle Posts: 2,363
    edited 2007-08-15 17:04
    You rock !

    I got the counter at 0001 ! (does it count ?) yeah.gif seems that it does not :-(

    Post Edited (Ale) : 8/15/2007 5:09:26 PM GMT
    easyprop_cnt0001.png
    1680 x 1050 - 178K
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-15 17:16
    Ale,

    the counter is not counting :-(

    Will have a look tomorrow or later on

    but the important thing is that my hardware is running stabil and not burning away.

    It draws now 190mA and is powered via USB.

    I make a 24hr onlinetest with this setup.

    Franz






    Ale said...
    You rock !

    I got the counter at 0001 ! (does it count ?) yeah.gif seems that it does not :-(
  • potatoheadpotatohead Posts: 10,260
    edited 2007-08-15 17:20
    Works for me!

    Well done.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Propeller Wiki: Share the coolness!
  • Oldbitcollector (Jeff)Oldbitcollector (Jeff) Posts: 8,091
    edited 2007-08-15 17:40
    I can't help be wonder if your setup could endure a ./ing.. <smirk>

    (No I'm not going to do that to you.. [noparse]:)[/noparse]

    Oldbitcollector

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    The comments and code above are proof that a million monkeys with a million propeller chips *could* write Shakespeare!
  • HarleyHarley Posts: 997
    edited 2007-08-15 17:41
    Hi Franz,

    My main computer is a iMac, but for PIC or Prop work I'm using a IBM ThinkPad PC.

    Using the iMac, nothing shows except some text at left/top, no scrolling available, no graphics (that I've seen from forum image).

    Using the ThinkPad, that URL won't even begin to load anything from the browser.

    Several years ago when I tried to bring up a web site I noted the differences that different browsers don't seem to do things the same or correctly. Apparently these browsers weren't developed from the same specifications.

    Just a note from another user.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Harley Shanko
    h.a.s. designn
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-15 18:09
    deSilva said...
    Franz, please add a visitor counter!
    deSilva,

    its "tricky" done and its counting :-)

    Franz
  • MightorMightor Posts: 338
    edited 2007-08-15 18:50
    Oldbitcollector said...
    I can't help be wonder if your setup could endure a ./ing.. <smirk>

    (No I'm not going to do that to you.. [noparse]:)[/noparse]

    Oldbitcollector
    We'll put it on digg as well and stumbleupon while we're at it [noparse]:)[/noparse]

    Gr,
    Xander

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    | Any sufficiently advanced technology is indistinguishable from magic.
  • Rob7Rob7 Posts: 275
    edited 2007-08-15 19:10
    Franz,

    Looks great, Hits were 168,169.

    Rob7
  • BasilBasil Posts: 380
    edited 2007-08-15 20:56
    Works nicely [noparse]:)[/noparse]

    Im using Firefox if it makes any difference.

    I was hit # 233

    Nice work [noparse]:)[/noparse]
  • mcstarmcstar Posts: 144
    edited 2007-08-15 21:03
    HOW cool it is to know that everytime I hit refresh, somewhere, out there, a propeller is updating it's memory.

    yeah.gif
  • RinksCustomsRinksCustoms Posts: 531
    edited 2007-08-16 00:41
    ain't doin squat on IE7.. [noparse]:([/noparse]

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    E3 = Thought

    http://folding.stanford.edu/·- Donating some CPU/GPU downtime just might lead to a cure for cancer! My team stats.
  • MightorMightor Posts: 338
    edited 2007-08-16 03:54
    It seems to be offline for me. I tried with FF and msie 7. Local time is now 05:54 CEST.

    Gr,
    Mightor

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    | Any sufficiently advanced technology is indistinguishable from magic.
  • parskoparsko Posts: 501
    edited 2007-08-16 07:06
    mcstar said...
    HOW cool it is to know that everytime I hit refresh, somewhere, out there, a propeller is updating it's memory.

    yeah.gif

    I totally agree with mcstar!!!!

    Works for me from Holland on Firefox 2.0.0.6!

    Good work gentlemen!!!

    -Parsko
  • inserviinservi Posts: 113
    edited 2007-08-16 07:38
    Hello,

    It's working right !
    Graham Stabler said...
    If so let us control an led [noparse]:)[/noparse]

    I'm ok with Graham and impatient to see the complete project description !

    Well done Franz !

    dro.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    in medio virtus
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-16 11:50
    some infos:

    for testing my new hardware i use the Harrison propTCP.

    The ENC28J60 is connected to P12,P13,P14,P15 and P17.

    Here are some hardware details:

    sheet.jpg
  • Bob Lawrence (VE1RLL)Bob Lawrence (VE1RLL) Posts: 1,720
    edited 2007-08-16 17:30
    No luck with Firefox 2006, Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.8.1.6) Gecko/20070725 Firefox/2.0.0.6


    but all ok with :

    Opera
    Version
    9.20
    Build
    8771
    Platform
    Win32
    System
    Windows XP
    Java
    Sun Java Runtime Environment version 1.6

    up to 657


    Great!! work.
  • AleAle Posts: 2,363
    edited 2007-08-16 17:59
    No problem with ff 2.0.0.6, on Linux (screen shot above), I got 671 now.
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-16 18:13
    Hi guys,

    many thanks for the testings smile.gif
    The Harrison propTCP works great and you guys can not "kill" the running application.
    The hardware works great, nothing burned down, yet.
    Its just great.

    thanks
    Franz
  • BTXBTX Posts: 674
    edited 2007-08-17 01:19
    Hi Franz !!

    Congratulations !! good job !! it worked for me too.

    Will you post some code for the prop ethernet ??

    Do you have a assembled version of your board, with ethernet included now ?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Regards.

    Alberto.
  • Harrison.Harrison. Posts: 484
    edited 2007-08-17 02:47
    Franz is using the ethernet test / demo code that I wrote a few months ago. The code is at code.google.com/p/proptcp/ . Beware that the current version is licensed under the GPL v3 license, which does require you to release your source code if you distribute any hardware or binaries that utilize the code.
  • BTXBTX Posts: 674
    edited 2007-08-17 03:04
    Oh Sorry Harrison... I've never saw that.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Regards.

    Alberto.
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-17 09:05
    BTX said...

    Hi Franz !!

    Do you have a assembled version of your board, with ethernet included now ?

    Yes Alberto.

    There are some·Boards ready, inclusive the ENC28J60 and the MagJack.

    best regards

    Franz
  • Franz AchatzFranz Achatz Posts: 140
    edited 2007-08-27 16:18
    there is a DS1621 Temp Chip connected to the Propeller Web Server, now.

    http://213.84.77.105
    (klick the Propeller I/O Control link).

    have fun
    Franz
  • parts-man73parts-man73 Posts: 830
    edited 2007-08-27 16:56
    25 degrees C right now, looks to be working fine.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Brian

    uController.com - home of SpinStudio
Sign In or Register to comment.