Shop OBEX P1 Docs P2 Docs Learn Events
Eagle or Diptrace — Parallax Forums

Eagle or Diptrace

Karl SmithKarl Smith Posts: 50
edited 2007-05-04 18:02 in Propeller 1
Does anyone have Eagle or Diptrace schematic symbols for the Propeller

Comments

  • parts-man73parts-man73 Posts: 830
    edited 2007-05-04 15:30
    look here:

    http://forums.parallax.com/showthread.php?p=602049

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Brian Meade

    "They who dream by day are cognizant of many things which escape those who dream only by night" - Edgar Poe
  • TomSTomS Posts: 128
    edited 2007-05-04 16:05
    Here are some more examples I've made up. I've included a few others that are applicable to the propeller.

    Tom
    lbr
    lbr
    prop.lbr
    17K
  • Karl SmithKarl Smith Posts: 50
    edited 2007-05-04 17:10
    Thank, these lib's are just what I was looking for
  • TomSTomS Posts: 128
    edited 2007-05-04 18:02
    Note: I use 9mils as my minimum pad spacing and trace width so I've narrowed the pads on the packages with 0.65MM pad spacing so my DRC doesn't generate errors. I've made those pads 0.42MM wide, giving me a pad spacing of 9.055 mils. I tried using 7mil spacing but had two boards with internal shorts that I didn't catch before placing components. The board manufacturers made new boards for me at their cost but I lost a lot of time and most of the components on the bad boards so now I stick with 9mils.

    Hope this helps
    Tom
Sign In or Register to comment.