SMD Prop_oz module
OzStamp
Posts: 377
Hi All
Attached an image of a SMD module that holds the QFP Propeller + crystal.
Lay out is such that the eeprom sits neatly underneath it.
The three pins next to the crytsal are not used so the RX TX + RST can be
brought out neatly to the Prop plug for programming.
We have made a small test batch on the QuickCircuit router.. first go works.
Thought we share it with you all.
Happy Easter to all
Ronald Nollet··
Melbourne Australia
Post Edited (OzStamp) : 4/6/2007 2:19:56 PM GMT
Attached an image of a SMD module that holds the QFP Propeller + crystal.
Lay out is such that the eeprom sits neatly underneath it.
The three pins next to the crytsal are not used so the RX TX + RST can be
brought out neatly to the Prop plug for programming.
We have made a small test batch on the QuickCircuit router.. first go works.
Thought we share it with you all.
Happy Easter to all
Ronald Nollet··
Melbourne Australia
Post Edited (OzStamp) : 4/6/2007 2:19:56 PM GMT
383 x 329 - 111K
Comments
......... that is to say its 'Down Under' !!.... sorry couldn't resist..
Regards,
Quattro
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
'Necessity is the mother of invention'
Post Edited (QuattroRS4) : 4/6/2007 2:28:41 PM GMT