bs2 project
boonboy
Posts: 10
Hi guys I'm new to this kind of thing.
But I am really stuck and need your help.
I have been given the task at uni to build a temperature logging system using the bs2. I found the relevant circuit diagram & have managed this with a bs2 chip, relevant board and a few components on a breadboard.
I also found the relevant logging program and have used this within the stamp editor. I connected the board to my machine using a serial to usb adaptor & after a few changes, yes it displays temperature via the stamp editor interface.
The next segment of my project is slightly trickier, I have been asked to attach this board to a linux machine acting as a router to make the board available over the internet. I need ideas for this section. I read something about visual basic being able to produce a dynamic web page with bs2 data, but I dont know if porting the board over to linux would be possible. please please give me your input.
I know I'm asking a lot but the final segment of the project is to port this working internet based system onto a standalone router i.e. cisco or summit & connect the bs2 thermal logger to the router through the rs232 port. This should allow internet based access to the bs2 board over the net. HELP!
But I am really stuck and need your help.
I have been given the task at uni to build a temperature logging system using the bs2. I found the relevant circuit diagram & have managed this with a bs2 chip, relevant board and a few components on a breadboard.
I also found the relevant logging program and have used this within the stamp editor. I connected the board to my machine using a serial to usb adaptor & after a few changes, yes it displays temperature via the stamp editor interface.
The next segment of my project is slightly trickier, I have been asked to attach this board to a linux machine acting as a router to make the board available over the internet. I need ideas for this section. I read something about visual basic being able to produce a dynamic web page with bs2 data, but I dont know if porting the board over to linux would be possible. please please give me your input.
I know I'm asking a lot but the final segment of the project is to port this working internet based system onto a standalone router i.e. cisco or summit & connect the bs2 thermal logger to the router through the rs232 port. This should allow internet based access to the bs2 board over the net. HELP!
Comments
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
- Stephen
http://forums.parallax.com/showthread.php?p=623527
www.linuxjournal.com/article/7403