Shop OBEX P1 Docs P2 Docs Learn Events
Announcement: First Application Note "Propeller Counters" is now availible for — Parallax Forums

Announcement: First Application Note "Propeller Counters" is now availible for

Paul BakerPaul Baker Posts: 6,351
edited 2006-12-17 16:27 in Propeller 1
The long awaited application note on the Propeller counters is now availible from the downloads section of the Propeller page.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Paul Baker
Propeller Applications Engineer

Parallax, Inc.

Comments

  • DuckHeadDuckHead Posts: 7
    edited 2006-12-13 21:52
    I so must be psychic... I just logged in to the forum to check if this document had gone public. And it had, like 20 minutes earlier or so.
    freaked.gif

    This is just what I need, tutorials, examples and documentation.
    Keep up the good work!
  • CJCJ Posts: 470
    edited 2006-12-14 00:43
    found what looks to be a typo in frequency count.spin

    the assembly cog is launched with the value of freq rather than the address of freq

    shouldn't it be cognew(@entry, @freq)

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Who says you have to have knowledge to use it?

    I've killed a fly with my bare mind.
  • Paul BakerPaul Baker Posts: 6,351
    edited 2006-12-14 01:51
    Thanks for pointing that out, I'll add it to the errata for the next revision.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Paul Baker
    Propeller Applications Engineer

    Parallax, Inc.
  • william chanwilliam chan Posts: 1,326
    edited 2006-12-14 03:12
    What is a Propeller Counter?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    www.fd.com.my
    www.mercedes.com.my
  • Paul BakerPaul Baker Posts: 6,351
    edited 2006-12-14 03:21
    The counter module inside the Propeller, each cog has two for 16 on each Propeller. Customers felt they were inadequately described in the manual so I wrote some documentation for them.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Paul Baker
    Propeller Applications Engineer

    Parallax, Inc.
  • Graham StablerGraham Stabler Posts: 2,507
    edited 2006-12-14 17:29
    And the customer is always right [noparse]:)[/noparse]

    Looks good, I've printed it off for full digestion this evening.

    Graham
  • tdustdus Posts: 6
    edited 2006-12-17 16:27
    is exactly what I need, thank you !
Sign In or Register to comment.