Shop OBEX P1 Docs P2 Docs Learn Events
A little help with the Toddler Servos — Parallax Forums

A little help with the Toddler Servos

Leon2828Leon2828 Posts: 1
edited 2006-12-03 17:42 in Robotics
Hi, my toddler bot which i have used for 2 weeks suddenly stopped working i think.
I think theres an issue with the servos, as when i turn the toddler bot on, with a program loaded, it doesn't move. The servos don't seem to be even working.
I can tell that the toddler bot is on, as the green LED turns on, as well as the infrared program works too.

Any help is appreciated.

Comments

  • dandreaedandreae Posts: 1,375
    edited 2006-11-08 01:11
    I understand· that the green LED is on, however, I would verify that your batteries are good.· If you take a voltmeter and measure Vin to Vss on the board·you should see over 6v.· If not, I recommend changing the batteries.

    Dave

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Dave Andreae

    Parallax Tech Support·
  • roserose Posts: 6
    edited 2006-12-03 09:24
    hi...i have the same problem with my toddler. But the only difference is that it isnt working from the start. and the green LED is glowing. The batteries are new ones. Do u think theres some trouble with the mechanical parts?
  • sumeetsumeet Posts: 28
    edited 2006-12-03 17:42
    Hi leon,
    Hope·Vs1 & Vs2·are·connected/wired to Vss.·
Sign In or Register to comment.