Shop OBEX P1 Docs P2 Docs Learn Events
Propeller IDE Problem — Parallax Forums

Propeller IDE Problem

PMinMOPMinMO Posts: 5
edited 2006-10-17 19:33 in Propeller 1
My propeller IDE on my desktop coninually comes up with an error when I bring it up that a disk is missing.· The computer has been off an on (rebooted) numerious times and it still continues.· I've redownloaded, reinstalled, no change. It doesn't do it on my laptop.· Suggestions?

Phil

Comments

  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-10-17 16:27
    Phil,
    ·
    ·· Do you happen to have a Camera Card Reader connected to your computer?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
  • Phil Pilgrim (PhiPi)Phil Pilgrim (PhiPi) Posts: 23,514
    edited 2006-10-17 16:34
    Chris,

    I'm having that same problem again myself. And it is from a memory card reader. It resurfaced after I inserted, then removed, a camera card from the reader.

    -Phil
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-10-17 16:47
    Phil,
    ·
    ·· I know this was an issue with the BASIC Stamp Editor.· It seems when the ‘Explorer’ sees a drive and tries to read it and that drive has no mounted volume perhaps this is what generates the error.· Jeff could answer this better, but usually having the card inserted or disconnecting the drive will curb the problem.· Simply canceling past it is a work around.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
  • PMinMOPMinMO Posts: 5
    edited 2006-10-17 19:33
    yes there is a 4 port card reader as an integral part of the machine. I do have a usb flas drive plugged in?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Phil

    Too many interests, too many projects, not enough time!!!
    Visit my website http://PMinMO.com
    ·
Sign In or Register to comment.