Shop OBEX P1 Docs P2 Docs Learn Events
PC_Debug_Test — Parallax Forums

PC_Debug_Test

uicuic Posts: 3
edited 2006-08-30 04:59 in Propeller 1
Hello!

Im have just get my Propeller Demo Board, and I tested the VGA demo, it works prefectly.
But when Im tested the PC_Debug_Test program, acording to 'Nuts & Volts Magazine' "The Object of the Machine (May 2006)"
my Hyperterminal just do nothing and after a while the demoboard lit the 8 led (just like 'Im idle').
I have played round with diffrent baudrate (in hyperterminal and in PC_Debug_Test.spin )

Have anyone had the same problem, and solve it?
Any idees?

Thanks
/H

Comments

  • glentechglentech Posts: 35
    edited 2006-08-29 21:52
    I dont have the demo board and I just made up my serial just like the schematic shows (no usb) and I couldnt get mine to work unless I used the bs2 debug terminal. Maybe someone who knows something can tell us whats going on.
  • uicuic Posts: 3
    edited 2006-08-30 04:59
    Now my application works, the problem was that I dint load the program into the EEPROM, and then the propeller chip lose the program when I puch the reset button (It took me the nigt to understand that Im a fool)

    Thanks

    /H
Sign In or Register to comment.