Shop OBEX P1 Docs P2 Docs Learn Events
The ultimate Developement station!!!! — Parallax Forums

The ultimate Developement station!!!!

kingspudkingspud Posts: 128
edited 2006-07-11 21:42 in Robotics
Hello all,

Just wanted to give everyone a look at my Ultimate Developement station!

I have the Professional Development board with many other devices!!!

See [noparse][[/noparse]3] attachments!!!!!

If anyone wants the dimensions to this setup I can email them to you!

I used 1/2" birch with a 3/4" ply base!

Joe· jumpin.gif
UDS_1.jpg
2272 x 1704 - 1M
UDS_2.jpg
2272 x 1704 - 820K
UDS_3.jpg
2272 x 1704 - 911K

Comments

  • BamseBamse Posts: 561
    edited 2006-06-26 16:10
    Sweet...

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Living on the planet Earth might be expensive but it includes a free trip around the sun every year...

    Experience level:
    [noparse][[/noparse] ] Let's connect the motor to pin 1, it's a 6V motor so it should be fine.
    [noparse][[/noparse] ] OK, I got my resistors hooked up with the LEDs.
    [noparse][[/noparse]X] I got the Motor hooked up with the H-bridge and the 555 is supplying the PWM.
    [noparse][[/noparse] ] Now, if I can only program the BOE-BOT to interface with he Flux Capacitor.
    [noparse][[/noparse] ] I dream in SX28 assembler...

    /Bamse
  • RinksCustomsRinksCustoms Posts: 531
    edited 2006-06-29 02:19
    that's nice, but what do you plan on controlling with all those servo's?

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Definetly a E3 (Electronics Engineer Extrodinare!)
    "I laugh in the face of imposible,... not because i know it all, ... but because I don't know well enough!"
  • kingspudkingspud Posts: 128
    edited 2006-06-29 15:58
    Hello,

    6 are continuous servos and 6 are standard servos so I can test multiple function devices.

    Two projects I am working on deal with servos.

    1 deals with a robot that uses 6 wheels and the other deals with a 6 legged robot!

    Joe
  • Charlie JohnsonCharlie Johnson Posts: 147
    edited 2006-06-29 20:18
    Also very nice... But, where is the SX and Propeller ?? Just kidding. Very nice work!
  • sam_sam_samsam_sam_sam Posts: 2,286
    edited 2006-06-30 01:34
    ··· kingspud

    This is a very nice project

    ·What i realy like is the fact that you mounted all of these servo's all on· one·Board
    Please let us know what projects that you make using your Ultimate Developement station·· idea.gif



    ·Sam



    All these GUYS are so happy that they Can Not Help them self
    They might have gone MAD we just do not know
    ·





    hop.gifjumpin.gifroll.gif
  • A.C. fishingA.C. fishing Posts: 262
    edited 2006-07-06 18:21
    Lol... it would be cool if you sold these
    You know, like one of those 100 in 1 electronics kits

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔

    Somebody said...
    -Never Underestimate the power of human stupidity.
    ·
  • verobelverobel Posts: 81
    edited 2006-07-11 20:10
    You have a enough servos there to drive/control any vehicle.. land, water, airborn.. I think you should add another board with inputs/sensors like accelerometer, global positioning, thermometer, tachometer, pressure sensors with dedicated displays.. and then maybey a bank of potentiometers to simulate voltage levels coming from various devices.. and of course a multichannel A/D convertor (like the ADC0838) to read up to 8 channels..

    Then try simulating different vehicles and tracking parameters with stamp plot pro.

    lookin good, john
  • James AndersonJames Anderson Posts: 52
    edited 2006-07-11 21:42
    very cool project! smile.gif

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    There once was a lady named Bright
    who traveled much faster than light
    She departed one day in a relative way
    and Returned on the Previous Night

    Cheers,
    Wannabe Ub3r Geek
Sign In or Register to comment.