Shop OBEX P1 Docs P2 Docs Learn Events
BS2-OEM Question — Parallax Forums

BS2-OEM Question

RGDeLongRGDeLong Posts: 1
edited 2006-06-12 16:55 in BASIC Stamp
If I leave off the serial port connector on a BS2-OEM, what other parts would I not need to install? Just trying to keep parts count to a minimum. (I'd program the EEPROM on another BS2-OEM).

Thanks in advance!

Comments

  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-06-12 16:55
    Have a look at the following schematics.· There is one that is the bare minimum components required to run the Stamp Module.· Bear in mind that many of the resistors are in packs and as such you may not be able to remove those.· I hope this helps.

    http://forums.parallax.com/showthread.php?p=567989

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
    csavage@parallax.com
Sign In or Register to comment.