Shop OBEX P1 Docs P2 Docs Learn Events
Custom homework board with surface mount components — Parallax Forums

Custom homework board with surface mount components

preyespreyes Posts: 7
edited 2006-04-19 20:33 in BASIC Stamp
Hello,

I was wondering if it is possible for me to order a custom built board? I basically need a basic stamp Homework board module (with only surface mount
components) and without the 9-pin connector and development breadboard. Does anyone have the capability to do this?· If not, can you please direct me to someone who can?
Thank you.

Comments

  • NewzedNewzed Posts: 2,503
    edited 2006-04-17 16:06
    I might be able to make such a board on my mill.· If you have the layout in Expresspcb please send it to me and I'll let you know.· If you don't have the layout send me a schematic.

    Sid
    Newzed@aol.com
  • NewzedNewzed Posts: 2,503
    edited 2006-04-17 17:28
    Preyes, I can not make a board with an SSOP chip - I don't have a cutter small enough to go between the pins.· The 16C57 is availalbe in a 28-pin SOIC package which I can handle.· The SOIC pinout is a bit different so you would have modify your circuit a bit if you are interested.

    Sid
  • preyespreyes Posts: 7
    edited 2006-04-18 06:48
    Thanks Sid. I'm limited on space so I have to go with the smallest coponents possible.
  • Paul BakerPaul Baker Posts: 6,351
    edited 2006-04-19 19:17
    I sugget getting Eagle Cad lite, and designing your own board. I have way too much on my plate at the moment to do it.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    1+1=10
  • allanlane5allanlane5 Posts: 3,815
    edited 2006-04-19 20:33
    I believe BasicMicro has some prototyping cards that could be easily cut down, that work with the BS2.
    http://www.basicmicro.com/Product.aspx?productID=91&CategoryID=11·
    True, it's not surface mount, but you can still get pretty small...

    Post Edited (allanlane5) : 4/19/2006 8:46:42 PM GMT
Sign In or Register to comment.