Shop OBEX P1 Docs P2 Docs Learn Events
conecting a basic stamp 1 to a serial port — Parallax Forums

conecting a basic stamp 1 to a serial port

neo_x3mneo_x3m Posts: 3
edited 2006-03-20 02:57 in BASIC Stamp
··· hy·· !
···· end now my problem· :· i bougt a basic stamp 1 but no serial port adaptor
······ i want to create my own adaptor.
······ but i don't understand where goes pin number 1 and 6 of the serial adapter and what is VSS?
·if you kan help me pls send a masege to
· my question refers to the pictur e bilow
·····

Post Edited By Moderator (Chris Savage (Parallax)) : 3/20/2006 2:51:38 AM GMT

Comments

  • neo_x3mneo_x3m Posts: 3
    edited 2006-03-19 19:34
    please help!!!!!!
  • allanlane5allanlane5 Posts: 3,815
    edited 2006-03-19 20:14
    "VSS" is also known as "Ground". All the VSS lines should be connected together, and to Pin-5 of the DB-9, which is Ground.
  • PJAllenPJAllen Banned Posts: 5,065
    edited 2006-03-19 20:19
    neo_x3m said...
    i don't understand where goes pin number 1 and 6 of the serial adapter
    ····· Pins 1, 6, 8, 9 are not used (not connected.)
  • Chris SavageChris Savage Parallax Engineering Posts: 14,406
    edited 2006-03-20 02:57
    neo_x3m said...
    please help!!!!!!
    This is a forum, not a chat room.· It will most likely take more than one minute to get a reply/help.· Please·keep this in mind in future posts.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Chris Savage
    Parallax Tech Support
    csavage@parallax.com
Sign In or Register to comment.