Need a search engine pro...
Bean
Posts: 8,129
I've tried everything, but I cannot find out who makes the LED display I'm making a driver for.
I got some displays from ebay, but I need to find the manufacture.
There is a SX video overlay module in it for anyone who can find out who makes this thing.
Here's all the info I have:
Desc: 4-inch high, 4-digit, 7-segment green LED display
On back has "DSP-GSB408CMALT" under that it has "0106" and "Made in China"
Connector: 17 pin header socket (female) 0.1" spacing
I know the "40" is the size because I also have 2.5" and 1.8" displays that are the same # but with "25" and "18" instead of "40".
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"SX-Video·Module" Now available from Parallax for only $28.95
http://www.parallax.com/detail.asp?product_id=30012
"SX-Video OSD module" Now available from Parallax for only·$49.95
http://www.parallax.com/detail.asp?product_id=30015
Product web site: www.sxvm.com
"Ability may get you to the top, but it takes character to keep you there."
·
I got some displays from ebay, but I need to find the manufacture.
There is a SX video overlay module in it for anyone who can find out who makes this thing.
Here's all the info I have:
Desc: 4-inch high, 4-digit, 7-segment green LED display
On back has "DSP-GSB408CMALT" under that it has "0106" and "Made in China"
Connector: 17 pin header socket (female) 0.1" spacing
I know the "40" is the size because I also have 2.5" and 1.8" displays that are the same # but with "25" and "18" instead of "40".
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"SX-Video·Module" Now available from Parallax for only $28.95
http://www.parallax.com/detail.asp?product_id=30012
"SX-Video OSD module" Now available from Parallax for only·$49.95
http://www.parallax.com/detail.asp?product_id=30015
Product web site: www.sxvm.com
"Ability may get you to the top, but it takes character to keep you there."
·
Comments
What info do you need, I have the connection diagram 4 the pins...
I will have to go into my old archived email to find out more.....
I will get back to you!
Bob N9LVU
What I need the manufacture or a distributor so I can buy 100 more of them.
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"SX-Video·Module" Now available from Parallax for only $28.95
http://www.parallax.com/detail.asp?product_id=30012
"SX-Video OSD module" Now available from Parallax for only·$49.95
http://www.parallax.com/detail.asp?product_id=30015
Product web site: www.sxvm.com
"Ability may get you to the top, but it takes character to keep you there."
Post Edited (Bean (Hitt Consulting)) : 1/16/2006 3:58:11 AM GMT
I haven't had any luck finding a source for these yet.
Can you tell me where you got your units ?
Anyone else seen the modules anywhere ?
Thanks,
Bean.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
"SX-Video·Module" Now available from Parallax for only $28.95
http://www.parallax.com/detail.asp?product_id=30012
"SX-Video OSD module" Now available from Parallax for only·$49.95
http://www.parallax.com/detail.asp?product_id=30015
Product web site: www.sxvm.com
"Ability may get you to the top, but it takes character to keep you there."
·
However, the above displays seem to be only single digit displays...so this may not help you.
Deno
Post Edited (deno) : 1/25/2006 4:05:36 PM GMT
> [noparse][[/noparse]...] I am writing a driver for [noparse][[/noparse]the DSP-GSB408CMALT clock style display].
I also have a couple of these displays.
I obtained them at the UPENE "Propeller Fest Ohio" event a while back.
I am very interested in a Propeller driver for it.
Did you ever complete your driver? (If so, where do I find it, and what does it do?)
Is there a Propeller version of the driver already available?
Thanks!
- Keith
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Ain't gadetry a wonderful thing?
aka G. Herzog [noparse][[/noparse] 黃鶴 ] in Taiwan
Hey Bean... Did you ever get your driver for this module working? (I have some of them, too...)
- Keith Mc.
(BTW... I have a slightly improved visual edit of the wiring diagram for this module,
if anyone is interested. How do you upload them, or attach them to posts?)