Parallel LCD programming using the BS2

Erik Arendall

Does anyone have any examples on programming a Parallel LCD using a BS2? I know that the BS2p has this feature built in, but all·I have is a BS2 and the LCD that·I am using·has a Toshiba T6963C Controller. I have all the datasheets on it, but I’m wanting a little more specific to the BS2.
Any·advice would be a great help.
Thanks.

Short

····· Here is some code you might look through.

T&E Engineer

Erik,

I have recently posted SX/B (SX28) code for a Serial LCD by Parallax. However, there is plenty of info for 4 bit / 8 bit parallel code for the BS2.

Try here first:

http://www.parallax.com/dl/docs/books/sw/exp/sw11.pdf

http://www.parallax.com/dl/docs/books/sw/exp/sw12.pdf

http://www.parallax.com/detail.asp?product_id=603-00006



Timothy Gilmore
·

Chris Savage

That last link that Timothy posted would be what I would recommend.

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com