Shop OBEX P1 Docs P2 Docs Learn Events
psx 2 controller issue — Parallax Forums

psx 2 controller issue

SAMMYSAMMY Posts: 9
edited 2005-11-01 18:11 in Robotics
i· have some questions about this i get the the debug display and all buttons seem to work
but no response from servo's

Comments

  • allanlane5allanlane5 Posts: 3,815
    edited 2005-11-01 16:58
    Well, we need a few more details. What's a "PSX 2", for one thing.
  • SAMMYSAMMY Posts: 9
    edited 2005-11-01 17:03
    the psx 2 controller project in n&v magazine vol. 4
  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-11-01 17:11
    Are you running this program? Remeber that it takes a long time to get all the data from the PSX, so this simple program drives the BOE-Bot using the arrow keys on the left side of the PSX controller.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
  • allanlane5allanlane5 Posts: 3,815
    edited 2005-11-01 17:12
    Sorry to be dense, but I don't have "n&v magazine vol. 4". So, if you explain in words what a "psx 2" is, perhaps we'll be able to help.
  • SAMMYSAMMY Posts: 9
    edited 2005-11-01 17:12
    the project pertains of controlling a boe-bot w/ a playstation 2 controller
  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-11-01 17:16
    To be clear, the article has to do with interfacing to the PSX controller -- as a simple aside I tossed in the Boe-Bot project. Again, the Boe-Bot project uses only part of the controllers capabilities (just the buttons, does not read the analag joystick data -- not enough time to do that and refresh servos appropriately).

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
  • SAMMYSAMMY Posts: 9
    edited 2005-11-01 17:17
    Jon can you send me information on this project
    what is the blue leds for
  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-11-01 18:11
    There is no additional information -- this was a quick project and is presented as-is.· The LEDs were purely for decoration; when you press the fire buttons on either side of the handle the LEDs light.· You can see the robot I built (a demo for the IBM EXITE camp)·using the inteface in the attached photo.· The LEDs are plugged into the breadboard and face forward like lasers.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
    540 x 802 - 125K
Sign In or Register to comment.