Shop OBEX P1 Docs P2 Docs Learn Events
Is anyone using the Lantronix Xport? Advice please? — Parallax Forums

Is anyone using the Lantronix Xport? Advice please?

Buck RogersBuck Rogers Posts: 2,187
edited 2005-06-23 03:56 in BASIC Stamp
Hello from Buck Rogers
I've got another project being created. I'm down to the paper and pencil stage of development.

It involves the Lantronix Xport. Has anyone used one of them before? Also I've got just the device here, no development board or anything like that.
hop.gif

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Buck Rogers

www.gregg.levine.name

Comments

  • Ryan ClarkeRyan Clarke Posts: 738
    edited 2005-06-22 20:32
    Yes, I have used the Xport before- Are you trying to interface the Xport with the Basic Stamp (2) ?

    Keep in mind when mixing Xports and the Stamps that the Xport is a 3.3v device, not 5v...

    Ryan
  • Buck RogersBuck Rogers Posts: 2,187
    edited 2005-06-23 03:56
    Hello from Buck Rogers
    It happens that I am. I did read most of the documentation on the device so·I did notice that they did choose 3.3v for the internal logic.

    According tht to LVTTL standard which describes 3.3v logic the parts can sometimes stand the shock of a 5v input.

    jumpin.gif·

    I am still gathering ideas however. Can you attach a copy of your schematic? Also code for the thing for the stamp. This is on a Stamp1. Also RS232 ports aren't going away, they are just being made available via USB enumerators.

    ·
    LostboY said...
    Yes, I have used the Xport before- Are you trying to interface the Xport with the Basic Stamp (2) ?

    Keep in mind when mixing Xports and the Stamps that the Xport is a 3.3v device, not 5v...

    Ryan
    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Buck Rogers

    www.gregg.levine.name
Sign In or Register to comment.