Shop OBEX P1 Docs P2 Docs Learn Events
Uploading schematics using a Word Doc. — Parallax Forums

Uploading schematics using a Word Doc.

boblouboblou Posts: 10
edited 2005-03-31 14:38 in General Discussion
··· How do you copy and paste a word document that has a bitmap schematic in? The word document pastes ok but the schematic is blank.

Thanks Bob

Post Edited By Moderator (Dave Andreae (Parallax)) : 3/30/2005 12:44:42 AM GMT

Comments

  • Andy Lindsay (Parallax)Andy Lindsay (Parallax) Posts: 1,919
    edited 2005-03-30 00:37
    This link shows how to add images to your posts:

    How to - Adding Inline Images to Your Posts
  • Tom WalkerTom Walker Posts: 509
    edited 2005-03-31 14:38
    Typically, images in Word can be one of two types (not formats...types), embedded or referenced. If it is referenced, it exists outside of the document and gets looked at and put on the screen (and in print) only when needed. If this is the case, then you have to track down where it is (usually via right click and "Properties") and treat as a normal image file. If the image is embedded, you can right click on it and select "Copy" and then paste it into your favorite graphics program (one that can handle its "format", that is), and then treat as a normal image file.

    HTH

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Truly Understand the Fundamentals and the Path will be so much easier...
Sign In or Register to comment.