Shop OBEX P1 Docs P2 Docs Learn Events
memsic 2125 — Parallax Forums

memsic 2125

JiggsJiggs Posts: 26
edited 2005-04-02 01:45 in General Discussion
I've gotten my Memsic 2125 acceleromoter to output readings for the y-axis, bt the x-axis always reads 0. I've checked my connections over and over again. Could half of the sensor be dead?

▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
~Jiggs

Comments

  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-03-22 23:27
    It's not likely; check the connections again, they always seem to be the issue. Make sure you've got the right pin, the Memsic only has six and it's easy to be fooled with wire placement (ask me how I know....)

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
    Dallas, TX· USA
  • JiggsJiggs Posts: 26
    edited 2005-03-29 22:37
    the connections are right, the code is right. ive done every check imaginable. something else is wrong.

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    ~Jiggs
  • Jon WilliamsJon Williams Posts: 6,491
    edited 2005-03-29 22:38
    Okay, then, you might contact our Tech Support group (support@parallax.com) about an exchange if the unit is new (and in the warranty period).

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    Jon Williams
    Applications Engineer, Parallax
    Dallas, TX· USA
  • JiggsJiggs Posts: 26
    edited 2005-04-02 01:45
    I bought a new one and it works fine. But what happened to the sample Memsic2125.java thatwas on the old Javelin user group? I need some sample code to get the sensonrs tilt value...

    ▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
    ~Jiggs
Sign In or Register to comment.