Hey everyone, I have a personal favor to ask the group. Those of you who posted your work bench pictures in one of these three threads (I am posting this in all three) may have your pictures on my photo gallery. The problem is I don't know who's photos belong to who. So, if you posted your workbench or workspace here would you please stop over to:
The other day at Lowes I bought eight Plano boxes that appear identical to the ones that the PE Kit comes in. I say "appear" because I left all eight of them in Port Orchard - doh! Anyway, they were only $4.97 each.
I know that the Plano box that my PE kit came in was made in the USA, didn't actually check the Lowes ones - hope so...
Rich H
ooooooohhh post #666 - in a thread brought back from the dead no less!
Back on topic;
Over the holidays I gathered 23 treated 2x8s, 12 bags of blow in insulation, 11 rolls of R13 insulation, 5 squares of architectural shingles, 6 sheets of foam insulation, house wrap, drip rails, felt paper, four vinyl double pane slider windows, a pallet of HardiBoard siding and I'm sure some other stuff - all to build my new 12 x 16 shop. I kinda ran out of money momentarily but it should be done in the next couple months. Here's a preview;
Comments
Provas, Greece
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
-Rule your Destiny-
--Be Good. Be Bad. Be Provas--
Great minds shop alike...
This image was actually pulled from the thread that Chris mentioned at the top of this thread.
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Beau Schwabe
IC Layout Engineer
Parallax, Inc.
"It occurred to me we have been down this path, err, thread before...·
·http://forums.parallax.com/showthread.php?p=531927
·http://forums.parallax.com/showthread.php?p=531809"
Is it my imagination, or is something weird with the dates to these links.... Posted "Yesterday" and "Today" ????
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Beau Schwabe
IC Layout Engineer
Parallax, Inc.
Post Edited (Beau Schwabe (Parallax)) : 4/4/2006 10:12:20 PM GMT
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Tech Support
csavage@parallax.com
We need a sticky thread for "Show us pics of your workshop"
·- Rick
http://photos.savagecircuits.com/thumbnails.php?album=10
And help me identify who the owner of the photo is and a description for the photo(s). Thanks in advance to everyone who can help.
P.S. - If you want to add your photo just send them to me with descriptions and I will add them.
Best Regards,
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
Chris Savage
Parallax Engineering
Check out the new Savage Circuits TV!
·
I hope I can find a compartmentalized box for separating my different resistors [noparse]:D[/noparse]
I know that the Plano box that my PE kit came in was made in the USA, didn't actually check the Lowes ones - hope so...
Rich H
ooooooohhh post #666 - in a thread brought back from the dead no less!
Back on topic;
Over the holidays I gathered 23 treated 2x8s, 12 bags of blow in insulation, 11 rolls of R13 insulation, 5 squares of architectural shingles, 6 sheets of foam insulation, house wrap, drip rails, felt paper, four vinyl double pane slider windows, a pallet of HardiBoard siding and I'm sure some other stuff - all to build my new 12 x 16 shop. I kinda ran out of money momentarily but it should be done in the next couple months. Here's a preview;
▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔▔
The Simple Servo Tester, a kit from Gadget Gangster.
Post Edited (W9GFO) : 1/10/2010 4:35:25 AM GMT