Shop OBEX P1 Docs P2 Docs Learn Events
Assembled BS2 OEM not working... — Parallax Forums

Assembled BS2 OEM not working...

ArchiverArchiver Posts: 46,084
edited 2004-07-10 22:20 in General Discussion
Hi,

I just got my first BS2 OEM kit. I have assembled it and Checked voltage VDD
before I insert Stamp. I ma using beta 2.1 and Serial port to connect to
Stamp 2. For some reason, it's not detecting stamp. What other things I need
to check? Does anybody knows the voltage levels at different pins etc?

Thanks in advance

SAndesh

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2004-07-09 07:31
    HI,

    Here are some additional findings.

    1. On RESET pin, I am getting 3.6 volts.
    2. lookback --> Yes
    3. Echo --> yes
    4. getting message "no basic stamp found".


    Any ideas?

    - Sandesh
    Original Message
    From: <firsttime@a...>
    To: <basicstamps@yahoogroups.com>
    Sent: Thursday, July 08, 2004 6:12 PM
    Subject: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...


    > Hi,
    >
    > I just got my first BS2 OEM kit. I have assembled it and Checked voltage
    > VDD
    > before I insert Stamp. I ma using beta 2.1 and Serial port to connect to
    > Stamp 2. For some reason, it's not detecting stamp. What other things I
    > need
    > to check? Does anybody knows the voltage levels at different pins etc?
    >
    > Thanks in advance
    >
    > SAndesh
    >
    >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    > Body of the message will be ignored.
    >
    > Yahoo! Groups Links
    >
    >
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2004-07-09 21:19
    Are you using a laptop?

    Shawn


    > [noparse][[/noparse]Original Message]
    > From: <firsttime@a...>
    > To: <basicstamps@yahoogroups.com>
    > Date: 7/9/2004 9:12:06 AM
    > Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >
    > HI,
    >
    > Here are some additional findings.
    >
    > 1. On RESET pin, I am getting 3.6 volts.
    > 2. lookback --> Yes
    > 3. Echo --> yes
    > 4. getting message "no basic stamp found".
    >
    >
    > Any ideas?
    >
    > - Sandesh
    >
    >
    Original Message
    > From: <firsttime@a...>
    > To: <basicstamps@yahoogroups.com>
    > Sent: Thursday, July 08, 2004 6:12 PM
    > Subject: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >
    >
    > > Hi,
    > >
    > > I just got my first BS2 OEM kit. I have assembled it and Checked
    voltage
    > > VDD
    > > before I insert Stamp. I ma using beta 2.1 and Serial port to connect to
    > > Stamp 2. For some reason, it's not detecting stamp. What other things I
    > > need
    > > to check? Does anybody knows the voltage levels at different pins etc?
    > >
    > > Thanks in advance
    > >
    > > SAndesh
    > >
    > >
    > >
    > >
    > > To UNSUBSCRIBE, just send mail to:
    > > basicstamps-unsubscribe@yahoogroups.com
    > > from the same email address that you subscribed. Text in the Subject
    and
    > > Body of the message will be ignored.
    > >
    > > Yahoo! Groups Links
    > >
    > >
    > >
    > >
    > >
    >
    >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    Body of the message will be ignored.
    >
    > Yahoo! Groups Links
    >
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2004-07-10 00:15
    YEs. Dell with XP prof SP2.

    Original Message
    From: "Shawn Lowe" <livinlowe@e...>
    To: <basicstamps@yahoogroups.com>
    Sent: Friday, July 09, 2004 3:19 PM
    Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...


    > Are you using a laptop?
    >
    > Shawn
    >
    >
    >> [noparse][[/noparse]Original Message]
    >> From: <firsttime@a...>
    >> To: <basicstamps@yahoogroups.com>
    >> Date: 7/9/2004 9:12:06 AM
    >> Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >>
    >> HI,
    >>
    >> Here are some additional findings.
    >>
    >> 1. On RESET pin, I am getting 3.6 volts.
    >> 2. lookback --> Yes
    >> 3. Echo --> yes
    >> 4. getting message "no basic stamp found".
    >>
    >>
    >> Any ideas?
    >>
    >> - Sandesh
    >>
    >>
    Original Message
    >> From: <firsttime@a...>
    >> To: <basicstamps@yahoogroups.com>
    >> Sent: Thursday, July 08, 2004 6:12 PM
    >> Subject: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >>
    >>
    >> > Hi,
    >> >
    >> > I just got my first BS2 OEM kit. I have assembled it and Checked
    > voltage
    >> > VDD
    >> > before I insert Stamp. I ma using beta 2.1 and Serial port to connect
    >> > to
    >> > Stamp 2. For some reason, it's not detecting stamp. What other things I
    >> > need
    >> > to check? Does anybody knows the voltage levels at different pins etc?
    >> >
    >> > Thanks in advance
    >> >
    >> > SAndesh
    >> >
    >> >
    >> >
    >> >
    >> > To UNSUBSCRIBE, just send mail to:
    >> > basicstamps-unsubscribe@yahoogroups.com
    >> > from the same email address that you subscribed. Text in the Subject
    > and
    >> > Body of the message will be ignored.
    >> >
    >> > Yahoo! Groups Links
    >> >
    >> >
    >> >
    >> >
    >> >
    >>
    >>
    >>
    >>
    >> To UNSUBSCRIBE, just send mail to:
    >> basicstamps-unsubscribe@yahoogroups.com
    >> from the same email address that you subscribed. Text in the Subject and
    > Body of the message will be ignored.
    >>
    >> Yahoo! Groups Links
    >>
    >>
    >>
    >>
    >
    >
    >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    > Body of the message will be ignored.
    >
    > Yahoo! Groups Links
    >
    >
    >
    >
    >
  • ArchiverArchiver Posts: 46,084
    edited 2004-07-10 22:07
    Have you tried setting your FIFO setting to their lowest setting on the
    seriel port? Many new users have had this problem when using a laptop.
    Shawn


    > [noparse][[/noparse]Original Message]
    > From: <firsttime@a...>
    > To: <basicstamps@yahoogroups.com>
    > Date: 7/9/2004 5:15:27 PM
    > Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >
    > YEs. Dell with XP prof SP2.
    >
    >
    >
    Original Message
    > From: "Shawn Lowe" <livinlowe@e...>
    > To: <basicstamps@yahoogroups.com>
    > Sent: Friday, July 09, 2004 3:19 PM
    > Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >
    >
    > > Are you using a laptop?
    > >
    > > Shawn
    > >
    > >
    > >>
    > >>
  • ArchiverArchiver Posts: 46,084
    edited 2004-07-10 22:20
    Yes, no luck.

    Original Message
    From: "Shawn Lowe" <livinlowe@e...>
    To: <basicstamps@yahoogroups.com>
    Sent: Saturday, July 10, 2004 4:07 PM
    Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...


    > Have you tried setting your FIFO setting to their lowest setting on the
    > seriel port? Many new users have had this problem when using a laptop.
    > Shawn
    >
    >
    >> [noparse][[/noparse]Original Message]
    >> From: <firsttime@a...>
    >> To: <basicstamps@yahoogroups.com>
    >> Date: 7/9/2004 5:15:27 PM
    >> Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >>
    >> YEs. Dell with XP prof SP2.
    >>
    >>
    >>
    Original Message
    >> From: "Shawn Lowe" <livinlowe@e...>
    >> To: <basicstamps@yahoogroups.com>
    >> Sent: Friday, July 09, 2004 3:19 PM
    >> Subject: Re: [noparse][[/noparse]basicstamps] Assembled BS2 OEM not working...
    >>
    >>
    >> > Are you using a laptop?
    >> >
    >> > Shawn
    >> >
    >> >
    >> >>
    >> >>
    >
    >
    >
    >
    >
    > To UNSUBSCRIBE, just send mail to:
    > basicstamps-unsubscribe@yahoogroups.com
    > from the same email address that you subscribed. Text in the Subject and
    > Body of the message will be ignored.
    >
    > Yahoo! Groups Links
    >
    >
    >
    >
    >
Sign In or Register to comment.