Dmx lighting
Archiver
Posts: 46,084
Can anyone theorize or explain a way to do DMX output with a basic
stamp. All I know is DMX is loosly based on rs485. Is it possable at
all?
stamp. All I know is DMX is loosly based on rs485. Is it possable at
all?
Comments
BASIC Stamp module.
-- Jon Williams
-- Applications Engineer, Parallax
-- Dallas Office
Original Message
From: elfkeebler [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=5KfN2kbFQidrN7Ng6AxTUgl8zVEAnPi83Uf9YUZPd7f3tIP1SGV9xQQ6CoY3WQwzXFII6FNIrwoB7YS4FGs]elfkeebler@y...[/url
Sent: Tuesday, June 15, 2004 4:24 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] DMX LIGHTING
Can anyone theorize or explain a way to do DMX output with a basic
stamp. All I know is DMX is loosly based on rs485. Is it possable at
all?
BS2 can easily do 31250 baud.
On Tue, 15 Jun 2004, Jon Williams wrote:
> I believe the DMX protocol is at 250 kBaud -- to fast for a [noparse][[/noparse]current]
> BASIC Stamp module.
>
> -- Jon Williams
> -- Applications Engineer, Parallax
> -- Dallas Office
>
>
>
Original Message
> From: elfkeebler [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=zMDKkjmuWOluyX1_JEzPqRoTydoQgSum2O9k-tDXb0lkPvBGPacviOtdLE-HIzUBrnnsazqA28Qu6IaF6bhN]elfkeebler@y...[/url
> Sent: Tuesday, June 15, 2004 4:24 PM
> To: basicstamps@yahoogroups.com
> Subject: [noparse][[/noparse]basicstamps] DMX LIGHTING
>
>
> Can anyone theorize or explain a way to do DMX output with a basic
> stamp. All I know is DMX is loosly based on rs485. Is it possable at
> all?
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and Body of the message will be ignored.
>
> Yahoo! Groups Links
>
>
>
>
>
>
Sean T. Lamont, Director Of Engineering
Innovative Communications Technologies, Inc. http://www.ict.net
email: lamont@a... / sean@i...
"Do not fear mistakes, There Are None" - Miles Davis