bs2p40 compatible with makingthings accessories?
Archiver
Posts: 46,084
along with the basic stamp 2p40, my professor also ordered a number
of accessories from makingthings.com, for some odd reason. how can i
use these accessories with the 2p40? it appears as if the
makingthings chip has an analog in line. any help would be greatly
appreciated. here are the accessories.
Photocell
Temperature Sensor-Three Wire
Bend Sensor
Piezo sensor
Infrared Proximity sensor
Distance measuring Sensor
10 Turn Portentiometer
technical information is located at
http://www.makingthings.com/products/acc_datasheets/index.htm
a "cookbook" is located at
http://www.makingthings.com/projects/cookbook/cookbook.htm
i am just curious on how to interface and control the accessories
through the bsp40. thanks for the help.
of accessories from makingthings.com, for some odd reason. how can i
use these accessories with the 2p40? it appears as if the
makingthings chip has an analog in line. any help would be greatly
appreciated. here are the accessories.
Photocell
Temperature Sensor-Three Wire
Bend Sensor
Piezo sensor
Infrared Proximity sensor
Distance measuring Sensor
10 Turn Portentiometer
technical information is located at
http://www.makingthings.com/products/acc_datasheets/index.htm
a "cookbook" is located at
http://www.makingthings.com/projects/cookbook/cookbook.htm
i am just curious on how to interface and control the accessories
through the bsp40. thanks for the help.
Comments
http://www.parallax.com/html_pages/downloads/siccurriculum/documentation_sic_curriculum.asp
Regards,
John Baker
http://www.geocities.com/johnsrobotics
sponsitility <markmcleod50@y...> wrote:
along with the basic stamp 2p40, my professor also ordered a number
of accessories from makingthings.com, for some odd reason. how can i
use these accessories with the 2p40? it appears as if the
makingthings chip has an analog in line. any help would be greatly
appreciated. here are the accessories.
Photocell
Temperature Sensor-Three Wire
Bend Sensor
Piezo sensor
Infrared Proximity sensor
Distance measuring Sensor
10 Turn Portentiometer
technical information is located at
http://www.makingthings.com/products/acc_datasheets/index.htm
a "cookbook" is located at
http://www.makingthings.com/projects/cookbook/cookbook.htm
i am just curious on how to interface and control the accessories
through the bsp40. thanks for the help.
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and Body of the message will be ignored.
Yahoo! Groups Links
Do you Yahoo!?
Win a $20,000 Career Makeover at Yahoo! HotJobs
[noparse][[/noparse]Non-text portions of this message have been removed]