Robot/Stepper controller
Hello Listers,
We have a small project in which we need a small Robot Stepper controller
developed. We have thought that a Basic Stamp would be the perfect platform
to do this.
Our engineering staff is very busy right now with other projects so I
thought I would ask the list if there was anyone out there who had done
something like this before and would like to make a few extra bucks. Here
are the basic functionality needs:
1) Rotate two seperate stepper motors a full 360 degrees in both directions.
2) monitor 6-8 seperate optical Sensor triggers for status
3) trigger a solenoid
4) control 2 seperate LED's one for power on and another 2-color LED for
error status
This is a very simple and basic circuit we need designed, built and coded,
Our current plan is that once we get the basic design and implementation
coded then we will take over the coding for our specific solution.
If anyone is interested please contact me off list and we can talk a bit
more via email. We are flexible in regard to timeframe and I'm sure that
this would be a very easy project for an experienced Stamper.
regards,
Wyler Furgeson
President & CEO
Charismac Engineering, Inc.
We have a small project in which we need a small Robot Stepper controller
developed. We have thought that a Basic Stamp would be the perfect platform
to do this.
Our engineering staff is very busy right now with other projects so I
thought I would ask the list if there was anyone out there who had done
something like this before and would like to make a few extra bucks. Here
are the basic functionality needs:
1) Rotate two seperate stepper motors a full 360 degrees in both directions.
2) monitor 6-8 seperate optical Sensor triggers for status
3) trigger a solenoid
4) control 2 seperate LED's one for power on and another 2-color LED for
error status
This is a very simple and basic circuit we need designed, built and coded,
Our current plan is that once we get the basic design and implementation
coded then we will take over the coding for our specific solution.
If anyone is interested please contact me off list and we can talk a bit
more via email. We are flexible in regard to timeframe and I'm sure that
this would be a very easy project for an experienced Stamper.
regards,
Wyler Furgeson
President & CEO
Charismac Engineering, Inc.