palm to basic stamp tokenizer? Stache
Archiver
Posts: 46,084
--- In basicstamps@yahoogroups.com, "tundra242" <tundra242@y...>
wrote:
> Can you write in Pbasic on a palm handheld and write the program by
> the serial port to a BASIC stamp?
I see people asking to use the PALM to SEE what the Stamp is doing,
and I think there is lots of interest in that.
As far as programming goes, the PALM would be a hard device to do
anything but minor corrections. Maybe altering some program
variables ??? maybe simple data logging ??
A laptop would offer much easier access to the program and editing
features.
And, as a field device, don't forget the STACHE available from Tracy
Allen's website.
You can program that and then stick it in your pocket and take it to
your remote site and re-program a Stamp without a PC.
Hope that helps.
Dave
Making things faster and easier
http://www.visualmuses.com/chipcircuit/index.html
wrote:
> Can you write in Pbasic on a palm handheld and write the program by
> the serial port to a BASIC stamp?
I see people asking to use the PALM to SEE what the Stamp is doing,
and I think there is lots of interest in that.
As far as programming goes, the PALM would be a hard device to do
anything but minor corrections. Maybe altering some program
variables ??? maybe simple data logging ??
A laptop would offer much easier access to the program and editing
features.
And, as a field device, don't forget the STACHE available from Tracy
Allen's website.
You can program that and then stick it in your pocket and take it to
your remote site and re-program a Stamp without a PC.
Hope that helps.
Dave
Making things faster and easier
http://www.visualmuses.com/chipcircuit/index.html
Comments
debugging out or serialling out p16 then a terminal program on a palm should
be good for viewing no??
Original Message
From: "Dave Mucha" <davemucha@j...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, April 20, 2004 11:39 AM
Subject: [noparse][[/noparse]basicstamps] Re: palm to basic stamp tokenizer? Stache
> --- In basicstamps@yahoogroups.com, "tundra242" <tundra242@y...>
> wrote:
> > Can you write in Pbasic on a palm handheld and write the program by
> > the serial port to a BASIC stamp?
>
>
> I see people asking to use the PALM to SEE what the Stamp is doing,
> and I think there is lots of interest in that.
>
> As far as programming goes, the PALM would be a hard device to do
> anything but minor corrections. Maybe altering some program
> variables ??? maybe simple data logging ??
>
> A laptop would offer much easier access to the program and editing
> features.
>
> And, as a field device, don't forget the STACHE available from Tracy
> Allen's website.
>
> You can program that and then stick it in your pocket and take it to
> your remote site and re-program a Stamp without a PC.
>
> Hope that helps.
>
> Dave
>
>
>
>
> Making things faster and easier
> http://www.visualmuses.com/chipcircuit/index.html
>
>
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
> Yahoo! Groups Links
>
>
>
>
>
output and input device.
Please not that you will be restricted to the DEBUG parameters for a line by
line terminal. The direct cursor addressing modes only support a window
based terminal emulator.
B.T.W. You will need to have a null modem cable from the Palm to the Stamp.
I am using "Online" from www.markspace.com as terminal emulator.
Original Message
From: "SB" <steve.brady@r...>
To: <basicstamps@yahoogroups.com>
Sent: Tuesday, April 20, 2004 5:43 PM
Subject: Re: [noparse][[/noparse]basicstamps] Re: palm to basic stamp tokenizer? Stache
> But aren't here terminal programs out there for Palms? IF the stamp is
> debugging out or serialling out p16 then a terminal program on a palm
should
> be good for viewing no??
>
Original Message
> From: "Dave Mucha" <davemucha@j...>
> To: <basicstamps@yahoogroups.com>
> Sent: Tuesday, April 20, 2004 11:39 AM
> Subject: [noparse][[/noparse]basicstamps] Re: palm to basic stamp tokenizer? Stache
>
>
> > --- In basicstamps@yahoogroups.com, "tundra242" <tundra242@y...>
> > wrote:
> > > Can you write in Pbasic on a palm handheld and write the program by
> > > the serial port to a BASIC stamp?
> >
> >
> > I see people asking to use the PALM to SEE what the Stamp is doing,
> > and I think there is lots of interest in that.
> >
> > As far as programming goes, the PALM would be a hard device to do
> > anything but minor corrections. Maybe altering some program
> > variables ??? maybe simple data logging ??
> >
> > A laptop would offer much easier access to the program and editing
> > features.
> >
> > And, as a field device, don't forget the STACHE available from Tracy
> > Allen's website.
> >
> > You can program that and then stick it in your pocket and take it to
> > your remote site and re-program a Stamp without a PC.
> >
> > Hope that helps.
> >
> > Dave
> >
> >
> >
> >
> > Making things faster and easier
> > http://www.visualmuses.com/chipcircuit/index.html
> >
> >
> >
> >
> >
> >
> > To UNSUBSCRIBE, just send mail to:
> > basicstamps-unsubscribe@yahoogroups.com
> > from the same email address that you subscribed. Text in the Subject
and
> Body of the message will be ignored.
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
> Yahoo! Groups Links
>
>
>
>
>