Sumo won''t rum and moves slowly
Archiver
Posts: 46,084
Hello,
I didn't realise it was made by TAB. What I realised
was that the Sumo is powered by Parallax. So I assumed
that it was from Parallax. My appologies to u all.
Thanx for the links. It might be helpful.
I appreciate for all the help and suggestions that
were given to me. Thanx again.
--- LJGeib@a... wrote:
> I don't have one of these, but there is a website
> and a yahoo group dedicated
> to the TAB robot
>
> http://www.tabrobotkit.com/ for the website
>
> http://groups.yahoo.com/group/tabrobotkit For the
> group
>
>
> Larry
>
>
> In a message dated 4/12/04 8:13:34 AM Pacific
> Daylight Time,
> basicstamps@yahoogroups.com writes:
> Message: 4
> Date: Mon, 12 Apr 2004 05:14:52 -0700
> From: "Jon Williams" <jwilliams@p...>
> Subject: RE: re: Sumo won't turn and moves slowly
>
> There's the problem ... you don't have a Parallax
> SumoBot, you have the one
> made by TAB. The code and documentation for the
> Parallax SumoBot is NOT
> compatible with the robot you have. Perhaps another
> list member can point you to
> code and documentation for your robot.
>
> -- Jon Williams
> -- Applications Engineer, Parallax
> -- Dallas Office
>
>
>
Original Message
> From: Eliza Yasmin [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=gPgb87xsIJZxzPgafiJowsYPzfklxsXWGVBZOwYq9LpRfzFKNcrbcwIC4LOve-0Qmoplx94JTdn3YEqJnbwWEA]eliza_yasmin@y...[/url
> Sent: Sunday, April 11, 2004 11:56 PM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] re: Sumo won't turn and
> moves slowly
>
>
> Hello Gregg and Jon,
>
> Thanx for the info. As I am new in BASIC Stamp, I've
> been searching for documents on how to program a
> SumoBot and I've downloaded the SumoBot Manual in
> Parallax's page and read through the document. I
> started out with Experiment #2: SumoBot Locomotion.
> Refering to page 12, I loaded the example program
> given which will test the SumoBot's motors. I was
> hoping to see a correct output but the robot went
> the
> way i mentioned earlier.
>
> I noticed that the SumoBot in the Parallax's page is
> different from mine. Mine has 4 wheels and an on-off
> power switch instead of a three-position power
> switch.
> Can I still refer the manual? I would appreciate
> some
> guidance. [noparse]:)[/noparse]
>
>
> [noparse][[/noparse]Non-text portions of this message have been
> removed]
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
> Yahoo! Groups Links
>
>
> basicstamps-unsubscribe@yahoogroups.com
>
>
>
__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/
I didn't realise it was made by TAB. What I realised
was that the Sumo is powered by Parallax. So I assumed
that it was from Parallax. My appologies to u all.
Thanx for the links. It might be helpful.
I appreciate for all the help and suggestions that
were given to me. Thanx again.
--- LJGeib@a... wrote:
> I don't have one of these, but there is a website
> and a yahoo group dedicated
> to the TAB robot
>
> http://www.tabrobotkit.com/ for the website
>
> http://groups.yahoo.com/group/tabrobotkit For the
> group
>
>
> Larry
>
>
> In a message dated 4/12/04 8:13:34 AM Pacific
> Daylight Time,
> basicstamps@yahoogroups.com writes:
> Message: 4
> Date: Mon, 12 Apr 2004 05:14:52 -0700
> From: "Jon Williams" <jwilliams@p...>
> Subject: RE: re: Sumo won't turn and moves slowly
>
> There's the problem ... you don't have a Parallax
> SumoBot, you have the one
> made by TAB. The code and documentation for the
> Parallax SumoBot is NOT
> compatible with the robot you have. Perhaps another
> list member can point you to
> code and documentation for your robot.
>
> -- Jon Williams
> -- Applications Engineer, Parallax
> -- Dallas Office
>
>
>
Original Message
> From: Eliza Yasmin [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=gPgb87xsIJZxzPgafiJowsYPzfklxsXWGVBZOwYq9LpRfzFKNcrbcwIC4LOve-0Qmoplx94JTdn3YEqJnbwWEA]eliza_yasmin@y...[/url
> Sent: Sunday, April 11, 2004 11:56 PM
> To: basicstamps@yahoogroups.com
> Subject: RE: [noparse][[/noparse]basicstamps] re: Sumo won't turn and
> moves slowly
>
>
> Hello Gregg and Jon,
>
> Thanx for the info. As I am new in BASIC Stamp, I've
> been searching for documents on how to program a
> SumoBot and I've downloaded the SumoBot Manual in
> Parallax's page and read through the document. I
> started out with Experiment #2: SumoBot Locomotion.
> Refering to page 12, I loaded the example program
> given which will test the SumoBot's motors. I was
> hoping to see a correct output but the robot went
> the
> way i mentioned earlier.
>
> I noticed that the SumoBot in the Parallax's page is
> different from mine. Mine has 4 wheels and an on-off
> power switch instead of a three-position power
> switch.
> Can I still refer the manual? I would appreciate
> some
> guidance. [noparse]:)[/noparse]
>
>
> [noparse][[/noparse]Non-text portions of this message have been
> removed]
>
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed.
> Text in the Subject and Body of the message will be
> ignored.
>
> Yahoo! Groups Links
>
>
> basicstamps-unsubscribe@yahoogroups.com
>
>
>
__________________________________
Do you Yahoo!?
Yahoo! Small Business $15K Web Design Giveaway
http://promotions.yahoo.com/design_giveaway/