Shop OBEX P1 Docs P2 Docs Learn Events
to paralax rep — Parallax Forums

to paralax rep

ArchiverArchiver Posts: 46,084
edited 2004-03-29 17:51 in General Discussion
is the book on the nuts and volts page the one on lower right the
book you guys make avaible to learn to wire the bs2 to sound
aplications such as the light show setup connected to a mixer i
mentioned in my last post, im not recieving any feedback from my
post, so mebe i can atleast get a rep to direct me to the resorce
offered that will explain the functionalities i desire. any feedback
this time?

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2004-03-29 02:57
    Perhaps you're not being perfectly clear with your request, or -- and
    this happens -- sometimes others haven't done what you want to do and
    have nothing to offer. This group tends to be very forthcoming with
    information ... so you may want to clarify your original post.

    I've never seen a BASIC Stamp wired to respond to sound, but I suppose
    it could be done. You could use external filters to provide inputs to
    the BASIC Stamp and let your program respond to those inputs. Again,
    this is a custom application and it's going to be up to you to create
    it.

    Let me suggest your search the web for similar discrete projects to
    handle the audio end. Once you can get a digital output from a filter
    circuit that responds to a given frequency range, you'd be able to write
    code to deal with it.

    -- Jon Williams
    -- A Parallax Employee (I guess that makes me a "rep")

    Original Message
    From: jutsuju [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=bF-dUKnLEfcL5l5B2Bm-4PSKwD8Gb2UYTxka-6aOcwlT7Inujt5usz0bvEzbiJX6n0H09HM85xfCrGU0]xsavior38@h...[/url
    Sent: Sunday, March 28, 2004 12:49 PM
    To: basicstamps@yahoogroups.com
    Subject: [noparse][[/noparse]basicstamps] to paralax rep


    is the book on the nuts and volts page the one on lower right the
    book you guys make avaible to learn to wire the bs2 to sound
    aplications such as the light show setup connected to a mixer i
    mentioned in my last post, im not recieving any feedback from my
    post, so mebe i can atleast get a rep to direct me to the resorce
    offered that will explain the functionalities i desire. any feedback
    this time?
  • ArchiverArchiver Posts: 46,084
    edited 2004-03-29 17:51
    Dear Jutsuju,

    If MIDI is the intent there are two Nuts and Volts articles here for
    download:

    http://www.parallax.com/html_pages/downloads/nvcolumns/Nuts_Volts_Down
    loads_V4.asp

    If not MIDI, there are many other applications I can provide to help
    you along.

    Sincerely,

    Ken Gracey
    Parallax, Inc.

    --- In basicstamps@yahoogroups.com, "jutsuju" <xsavior38@h...> wrote:
    > is the book on the nuts and volts page the one on lower right the
    > book you guys make avaible to learn to wire the bs2 to sound
    > aplications such as the light show setup connected to a mixer i
    > mentioned in my last post, im not recieving any feedback from my
    > post, so mebe i can atleast get a rep to direct me to the resorce
    > offered that will explain the functionalities i desire. any
    feedback
    > this time?
Sign In or Register to comment.