BS1 Problem :''(
Archiver
Posts: 46,084
i dont know any of this, what does a parallel port look like? what does a serial
adapter look like. i have a big black cord, with a little tab end with
three-pin heads. and then i got a big *** end with 25 pins and it fits in my
printer port.
Jon Williams <jwilliams@p...> wrote[noparse]:D[/noparse]id you connect power?
How are you connecting to the BASIC Stamp? Serial? Parallel?
If serial -- are you using the serial adapter (you can't use a straight
serial cable with the Super Carrier, you need the serial adapter). The
programming connection for the BS1 is a 3-pin header; you must be
connected to that for the compiler to find the BS1.
-- Jon Williams
-- Applications Engineer, Parallax
-- Dallas Office
Original Message
From: hexshadow666 [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=yxz_i-sizvHdf8wqTvLzsJPgJdiDo_0dtTmRTGN4vyUR37zauE9HtSj1uaR9cpwK-26l54kBHJtp6ttZvSYk]hexshadow666@y...[/url
Sent: Monday, March 22, 2004 10:56 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] BS1 Problem
i just got this stuff, and i literally dont know what im doing. but i
have the Basic Stamp Manual and i hooked up from my serial port, the
Basic Stamp Super Carrier, with the BS1 hooked into it. according to
the book, its all hooked up right. then i typed in the first code it
told me to mess with, which was:
' {$BASIC BS1}
DEBUG "Hello World!"
and when i run it. it says:
ERROR - Hardware not found
anyone know what is wrong, please help.
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and Body of
the message will be ignored.
Yahoo! Groups Links
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
[noparse][[/noparse]Non-text portions of this message have been removed]
adapter look like. i have a big black cord, with a little tab end with
three-pin heads. and then i got a big *** end with 25 pins and it fits in my
printer port.
Jon Williams <jwilliams@p...> wrote[noparse]:D[/noparse]id you connect power?
How are you connecting to the BASIC Stamp? Serial? Parallel?
If serial -- are you using the serial adapter (you can't use a straight
serial cable with the Super Carrier, you need the serial adapter). The
programming connection for the BS1 is a 3-pin header; you must be
connected to that for the compiler to find the BS1.
-- Jon Williams
-- Applications Engineer, Parallax
-- Dallas Office
Original Message
From: hexshadow666 [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=yxz_i-sizvHdf8wqTvLzsJPgJdiDo_0dtTmRTGN4vyUR37zauE9HtSj1uaR9cpwK-26l54kBHJtp6ttZvSYk]hexshadow666@y...[/url
Sent: Monday, March 22, 2004 10:56 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] BS1 Problem
i just got this stuff, and i literally dont know what im doing. but i
have the Basic Stamp Manual and i hooked up from my serial port, the
Basic Stamp Super Carrier, with the BS1 hooked into it. according to
the book, its all hooked up right. then i typed in the first code it
told me to mess with, which was:
' {$BASIC BS1}
DEBUG "Hello World!"
and when i run it. it says:
ERROR - Hardware not found
anyone know what is wrong, please help.
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and Body of
the message will be ignored.
Yahoo! Groups Links
Do you Yahoo!?
Yahoo! Finance Tax Center - File online. File on time.
[noparse][[/noparse]Non-text portions of this message have been removed]