basic stamp and visual basic

Archiver

Hi!
I have a BS2 and are programming in Visual Basic.
i have managed to connect several sensors to the stamp and read them
in Pbasic. but now i want to read them in my own visual basic
program.

any ide

Archiver

If your intent is to use the BASIC Stamp as an interface between your sensors an
VB application, this article will help.

http://www.parallax.com/dl/docs/cols/nv/vol3/col/nv89.pdf

-- Jon Williams
-- Applications Engineer, Parallax
-- Dallas Office

---

Original Message

---

From: robanowitch2000 [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=yLwQQsPqZPA9CrNUjRm0pwkmYgepZUHEeHrk8ps4817L6Fy6xNS7iqatsqkzwOI-w9ZoDgTMOLXk15qqmJPfW87B1L0K]robert.bohlin@b...[/url
Sent: Monday, March 22, 2004 11:10 AM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] basic stamp and visual basic


Hi!
I have a BS2 and are programming in Visual Basic.
i have managed to connect several sensors to the stamp and read them
in Pbasic. but now i want to read them in my own visual basic
program.

any ide

Archiver

In the 'Files' area, find AlDemo\BS2_VBDemo.zip

This is a small but complete example using VB
on the PC side (and the MSCOMM control) to
send data back and forth from a BS2 to the PC.

--- In basicstamps@yahoogroups.com, "robanowitch2000"
<robert.bohlin@b...> wrote:
> Hi!
> I have a BS2 and are programming in Visual Basic.
> i have managed to connect several sensors to the stamp and read
them
> in Pbasic. but now i want to read them in my own visual basic
> program.
>
> any ide