Pbasic needed
Archiver
Posts: 46,084
Does anyone have any idea how to get a copy of the software to code
a basic stamp 2? i heard that it is programmed in Pbasic, but im not
sure. I got the board and microcontroller free, but no software.
Can someone help me out?
a basic stamp 2? i heard that it is programmed in Pbasic, but im not
sure. I got the board and microcontroller free, but no software.
Can someone help me out?
Comments
Parallax.
http://www.parallax.com/html_pages/
downloads/software/software_basic_stamp.asp
(You need to re-assemble the above link
in notepad, then cut-and-paste it into your
browser.
Download the
"BASIC Stamp Windows Editor version 2.0 (and above)"
full package. This includes the IDE, editor,
and compiler. You'll need a straight-through
DB-9 serial cable, and a 6 volt to 12 volt
wall-wart power-supply (or a 9-volt battery).
Since the proprietary part of the Stamp is
inside the chip, all development software and
documentation is available free on the Parallax
website (www.parallax.com).
See the 'Nuts&Volts' area for application
tutorials. See the 'Educational Curriculum'
area for more tutorials.
--- In basicstamps@yahoogroups.com, "Chrispy79" <powelc@r...> wrote:
> Does anyone have any idea how to get a copy of the software to code
> a basic stamp 2? i heard that it is programmed in Pbasic, but im
not
> sure. I got the board and microcontroller free, but no software.
> Can someone help me out?
writes:
> Does anyone have any idea how to get a copy of the software to code
> a basic stamp 2? i heard that it is programmed in Pbasic, but im not
> sure. I got the board and microcontroller free, but no software.
> Can someone help me out?
>
Goto www.parallax.com - downloads - and download the Stamp Manual.
Everything you need, along with examples.
Sid Weaver
W4EKQ
Port Richey, FL
[noparse][[/noparse]Non-text portions of this message have been removed]
Jim
http://www.geocities.com/jimforkin2003/
Original Message
From: Newzed@a... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=jXI5m23flT-sIgZe_ZNzuD2A44Xh37r89-r5W8M1T5_5MD1UUuaRKCAbH7-m1JN_isthyIi8]Newzed@a...[/url
Sent: Thursday, February 05, 2004 2:37 PM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] Pbasic needed
In a message dated 2/5/2004 2:34:46 PM Eastern Standard Time, powelc@r...
writes:
> Does anyone have any idea how to get a copy of the software to code
> a basic stamp 2? i heard that it is programmed in Pbasic, but im not
> sure. I got the board and microcontroller free, but no software.
> Can someone help me out?
>
Goto www.parallax.com - downloads - and download the Stamp Manual.
Everything you need, along with examples.
Sid Weaver
W4EKQ
Port Richey, FL
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Yahoo! Groups Links
writes:
Goto www.parallax.com - downloads - and download the Stamp Manual.
Everything you need, along with examples.
You can also download the editor for programming the Basic Stamps.
Randy Abernathy
4626 Old Stilesboro Road
Acworth, GA 30101
Ph / Fax: 770-974-5295
E-mail: cnc002@a...
I furnish technical support, repair, and other related services for your
industrial woodworking machinery. My background as Senior Service Engineer for
the
SCMI Group for nearly fifteen years with factory training, combines with my
extensive background in electronics, mechanics, pneumatics, electrical and CNC
machinery to offer you needed support for your machinery.
[noparse][[/noparse]Non-text portions of this message have been removed]