robotic arm for BS2
Archiver
Posts: 46,084
I'm looking for a reliable, semi industrial robotic arm that can be
programmed with the BS2 or the Parallax PLC. Just need a 180
degrees of rotation at the base and about a 12 inch reach. The
typical object to be handled would be a single 8 X 11 inch sheet of
card stock. Need the arm to perform a continuous cycle for long
periods of time. Could anyone point me in the right direction?
Thanks.
programmed with the BS2 or the Parallax PLC. Just need a 180
degrees of rotation at the base and about a 12 inch reach. The
typical object to be handled would be a single 8 X 11 inch sheet of
card stock. Need the arm to perform a continuous cycle for long
periods of time. Could anyone point me in the right direction?
Thanks.
Comments
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3071677788&category=32831
At 11:24 PM 1/19/2004 +0000, you wrote:
>I'm looking for a reliable, semi industrial robotic arm that can be
>programmed with the BS2 or the Parallax PLC. Just need a 180
>degrees of rotation at the base and about a 12 inch reach. The
>typical object to be handled would be a single 8 X 11 inch sheet of
>card stock. Need the arm to perform a continuous cycle for long
>periods of time. Could anyone point me in the right direction?
>Thanks.
>
>
>To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
>from the same email address that you subscribed. Text in the Subject and
>Body of the message will be ignored.
>
>
>Yahoo! Groups Links
>
>To visit your group on the web, go to:
> http://groups.yahoo.com/group/basicstamps/
>
>To unsubscribe from this group, send an email to:
> basicstamps-unsubscribe@yahoogroups.com
>
>Your use of Yahoo! Groups is subject to:
> http://docs.yahoo.com/info/terms/
> this might help you....
>
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3071677788&category=32831
>
Gary, as a note, I have seen that, and several other
Auctions on eBay that appear to be a bit misleading.
That Auction says it's for a controller, and that the
robotic arm is for demo only. I have also seen
auctions for servos, robots, and other things, all
with pictures, but the actual bid item is a single
chip, or controller.
=====
Chris Savage
Knight Designs
324 West Main Street
Montour Falls, NY 14865
(607) 535-6777
http://www.knightdesigns.com
__________________________________
Do you Yahoo!?
Yahoo! Hotjobs: Enter the "Signing Bonus" Sweepstakes
http://hotjobs.sweepstakes.yahoo.com/signingbonus
>I'm looking for a reliable, semi industrial robotic arm that can be
>programmed with the BS2 or the Parallax PLC. Just need a 180
>degrees of rotation at the base and about a 12 inch reach. The
>typical object to be handled would be a single 8 X 11 inch sheet of
>card stock. Need the arm to perform a continuous cycle for long
>periods of time. Could anyone point me in the right direction?
>Thanks.
These robotic arms may or may not be overkill:
http://www.lynxmotion.com/Category.aspx?CategoryID=27
Regards,
Bruce Bates
robotic automation parts that can be assembled for any type of automation
functions.
jim
http://www.geocities.com/jimforkin2003/
Original Message
From: Bruce Bates [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=6TDsfwonAj29PVwPiVOY8KOCirAUFiNGu0lLCovZ9PSRJHzkqD5oGJ9AA_DgHZ15KsjHquepUeoiiKEXc54]bvbates@u...[/url
Sent: Tuesday, January 20, 2004 2:43 AM
To: basicstamps@yahoogroups.com
Subject: Re: [noparse][[/noparse]basicstamps] robotic arm for BS2
At 11:24 PM 1/19/04 +0000, jordanlewis2330 wrote:
>I'm looking for a reliable, semi industrial robotic arm that can be
>programmed with the BS2 or the Parallax PLC. Just need a 180
>degrees of rotation at the base and about a 12 inch reach. The
>typical object to be handled would be a single 8 X 11 inch sheet of
>card stock. Need the arm to perform a continuous cycle for long
>periods of time. Could anyone point me in the right direction?
>Thanks.
These robotic arms may or may not be overkill:
http://www.lynxmotion.com/Category.aspx?CategoryID=27
Regards,
Bruce Bates
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Yahoo! Groups Links
To visit your group on the web, go to:
http://groups.yahoo.com/group/basicstamps/
To unsubscribe from this group, send an email to:
basicstamps-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/