Shop OBEX P1 Docs P2 Docs Learn Events
Parallax - Introducing the SureLink RF Transceiver — Parallax Forums

Parallax - Introducing the SureLink RF Transceiver

ArchiverArchiver Posts: 46,084
edited 2004-01-16 06:17 in General Discussion
*****************************************
New RF Products from Parallax

SureLink RF Transceiver
QuickLink Demo Board
*****************************************

INTRODUCTION
Parallax is excited to announce the availability of the feature-rich
SureLink RF Transceiver and QuickLink Demo Board. These new RF devices
will definitely take your RF projects to the next level. The most
enticing trait of the SureLink is that it supports full duplex serial
communication with integrated error checking and flow control. It also
includes a data encryption option for secure communications.

KEY FEATURES
- High speed data rates, up to 75600 Baud
- Range up to 1000 feet (dependent upon environment)
- Scratch pad flash memory of 128 bytes
- 16 run-time selectable channels
- Free PC software (available online)

FCC RULES
The SureLink module is an RF wireless transceiver operating at 900 MHz.
This module and the QuickLink Demo board are designed to comply with
FCC Part 15 Rules and Regulations.

ORDER INFORMATION
2 SureLink modules are required for bidirectional communication and we
recommend using each module with a QuickLink Demo Board for the
necessary interface connections. For more details and to place your
order, visit www.parallax.com or click on the direct links presented
below. Both items are in stock and ready for shipment.

SureLink RF Transceiver -
http://www.parallax.com/detail.asp?product_id=30065
QuickLink Demo Board -
http://www.parallax.com/detail.asp?product_id=30066

Sincerely,

Erik Wood
Parallax, Inc.
www.parallax.com

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2004-01-16 06:17
    How fast do the SureLink Tranceivers switch between transmit &
    receive when communicating between two transceivers?

    If I have a pair of the tranceivers set up so I have one connected to
    a computer that is communication with and controlling a device with a
    transceiver - what would be the delay for the receiving transceiver
    to switch to transmitter to send back status information along with
    acknowledgments of valid data??
Sign In or Register to comment.