help on basic stamp
Archiver
Posts: 46,084
Hello,
This is the first mail to this groups and i am a beginner in this.
I planned to buy basic stamp. I want to do a project in basic stamp to control
two
servo motors. I would be grateful if you could send the details regarding this.
Regards
ganesh
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
[noparse][[/noparse]Non-text portions of this message have been removed]
This is the first mail to this groups and i am a beginner in this.
I planned to buy basic stamp. I want to do a project in basic stamp to control
two
servo motors. I would be grateful if you could send the details regarding this.
Regards
ganesh
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
[noparse][[/noparse]Non-text portions of this message have been removed]
Comments
http://www.geocities.com/jimforkin2003/
jim
Original Message
From: GANESH KUMAR [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=sAWSJVqQQIm63KPgoscYFlfb9X4tQ26F_3kYPOUWyOMP0STNz8HxCOK6l8FibdHB242_8rwtX51jsJ-fLRA]anigani22@y...[/url
Sent: Wednesday, November 12, 2003 11:24 PM
To: basicstamps@yahoogroups.com
Subject: [noparse][[/noparse]basicstamps] help on basic stamp
Hello,
This is the first mail to this groups and i am a beginner in this.
I planned to buy basic stamp. I want to do a project in basic stamp to
control two
servo motors. I would be grateful if you could send the details regarding
this.
Regards
ganesh
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
[noparse][[/noparse]Non-text portions of this message have been removed]
To UNSUBSCRIBE, just send mail to:
basicstamps-unsubscribe@yahoogroups.com
from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
http://www.parallax.com/dl/docs/books/sw/exp/25.pdf
there are also some general motor control articles here (nuts and
volts articles):
http://www.parallax.com/html_pages/downloads/nvcolumns/Nuts_Volts_Dow
nloads_V2.asp
always check this page too (stampworks articles):
http://www.parallax.com/html_pages/downloads/sw/sw.asp
--- In basicstamps@yahoogroups.com, GANESH KUMAR <anigani22@y...>
wrote:
> Hello,
>
> This is the first mail to this groups and i am a beginner in this.
>
> I planned to buy basic stamp. I want to do a project in basic
stamp to control two
> servo motors. I would be grateful if you could send the details
regarding this.
>
> Regards
>
> ganesh
>
>
>
>
> Do you Yahoo!?
> Protect your identity with Yahoo! Mail AddressGuard
>
> [noparse][[/noparse]Non-text portions of this message have been removed]
It depends on what you want to do with the servos. If it is for a robot, and
you want the Stamp to do other things like detecting objects, you need a
sperate servo controller as well as a Stamp. Parallax makes the PWMPAL for
this job.
If you don't have a pressing time issue, the Stamp itself could control the
servos. It just won't be able to do anything else while it drives the
servos. In some applications this is fine. What are you building?
Jonathan
www.madlabs.info
Original Message
From: "GANESH KUMAR" <anigani22@y...>
To: <basicstamps@yahoogroups.com>
Sent: Wednesday, November 12, 2003 8:24 PM
Subject: [noparse][[/noparse]basicstamps] help on basic stamp
> Hello,
>
> This is the first mail to this groups and i am a beginner in this.
>
> I planned to buy basic stamp. I want to do a project in basic stamp to
control two
> servo motors. I would be grateful if you could send the details regarding
this.
>
> Regards
>
> ganesh
>
>
>
>
> Do you Yahoo!?
> Protect your identity with Yahoo! Mail AddressGuard
>
> [noparse][[/noparse]Non-text portions of this message have been removed]
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the Subject and
Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
>