Stamp to VB
Archiver
Posts: 46,084
Hi,
Im having difficulty alot of difficulty with what is probabaly a
very basic problem. All i am looking to do is get a value for
temperature from a DS1620 chip from my stamp 2sx to visual basic. I
dont have much experience with VB but I know I must use MSComm. I
would be very greatful for any help.
Yours Sincerly,
Fearghal
Im having difficulty alot of difficulty with what is probabaly a
very basic problem. All i am looking to do is get a value for
temperature from a DS1620 chip from my stamp 2sx to visual basic. I
dont have much experience with VB but I know I must use MSComm. I
would be very greatful for any help.
Yours Sincerly,
Fearghal
Comments
> Im having difficulty alot of difficulty with what is probabaly a
> very basic problem. All i am looking to do is get a value for
> temperature from a DS1620 chip from my stamp 2sx to visual basic. I
> dont have much experience with VB but I know I must use MSComm. I
> would be very greatful for any help.
> Yours Sincerly,
> Fearghal
We have several tutorials on using the Stamp with VB
http://www.rentron.com/VisualBasic.htm
Here's one for a wireless temperature transmitter using a PIC, but the VB
code will work with anything. http://www.rentron.com/PicBasic/VB_PIC_TEMP.htm
Regards,
-Bruce
tech@r...
http://www.rentron.com
get the VB_BS2Demo.zip file.
This has a small but complete example.
--- In basicstamps@yahoogroups.com, "Tech" <tech@r...> wrote:
> > Hi,
> > Im having difficulty alot of difficulty with what is probabaly
a
> > very basic problem. All i am looking to do is get a value for
> > temperature from a DS1620 chip from my stamp 2sx to visual basic.
I
> > dont have much experience with VB but I know I must use MSComm. I
> > would be very greatful for any help.
> > Yours Sincerly,
> > Fearghal
>
> We have several tutorials on using the Stamp with VB
> http://www.rentron.com/VisualBasic.htm
>
> Here's one for a wireless temperature transmitter using a PIC, but
the VB
> code will work with anything.
http://www.rentron.com/PicBasic/VB_PIC_TEMP.htm
>
>
> Regards,
>
> -Bruce
> tech@r...
> http://www.rentron.com
http://www.al-williams.com/stampcom.zip (VB and C++; two examples)
http://www.al-williams.com/npdaqax.htm (Made to work with our Netporter
board, but works fine if you mimic its format)
Regards,
Al Williams
AWC
* NEW: Read Position Data from a PS/2 Mouse:
http://www.al-williams.com/pak11.htm
>
Original Message
> From: fearghaloconnor [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=jzHJ9-uK2rQEyhkK6BBEuC0b-zx1ZmAvOG4ATlBsEp9x5ySO0wxqA2DbufdvYOoMKJ0LcjGa6LUvo8ZP77nl4aKD]fearghaloconnor@y...[/url
> Sent: Wednesday, November 12, 2003 6:43 AM
> To: basicstamps@yahoogroups.com
> Subject: [noparse][[/noparse]basicstamps] Stamp to VB
>
>
> Hi,
> Im having difficulty alot of difficulty with what is probabaly a
> very basic problem. All i am looking to do is get a value for
> temperature from a DS1620 chip from my stamp 2sx to visual basic. I
> dont have much experience with VB but I know I must use MSComm. I
> would be very greatful for any help.
> Yours Sincerly,
> Fearghal
>
>
>
> To UNSUBSCRIBE, just send mail to:
> basicstamps-unsubscribe@yahoogroups.com
> from the same email address that you subscribed. Text in the
> Subject and Body of the message will be ignored.
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>
>
>