Shop OBEX P1 Docs P2 Docs Learn Events
Parallax - New! Stamp PLC — Parallax Forums

Parallax - New! Stamp PLC

ArchiverArchiver Posts: 46,084
edited 2003-09-26 18:31 in General Discussion
*****************************
New! Stamp PLC
#30064 $199
*****************************

Hello Everyone,

Parallax has teamed up with Lawicel HB of Sweden to present you with an
industrial solution; the Stamp PLC. The Stamp PLC is a Program Logic
Controller that is perfectly sized (and priced) for automating small
machines. This merging of expertise has delivered a PLC that is ideal
for the small-scale PLC market. A 24-pin BASIC Stamp or Javelin Stamp is
required (sold separately).

Here is a list of primary features:

1) 8 Digital Inputs are grouped together courtesy of an on-board shift
register. BASIC Stamps and the Javelin Stamp have built-in commands to
read these with ease. Two additional digital inputs are read directly by
the Stamp. All inputs are optically isolated.

2) 8 Digital Outputs are optically isolated, electrically and thermally
protected.

3) Installing an optional A/D converter (sold separately #604-00026)
into its socket adds four analog input channels. Each channel can be
independently configured as 4-20mA, 0-5 VDC, -5 to +5 VDC, -10 to +10
VDC, and has 12-bits of resolution. Front Panel LEDs indicate the
status of all ten inputs and all eight outputs via a light-pipe array.

4) Heavy-duty power supply has built-in noise protection. RS-232 Serial
Port Once programming is completed, the on-board serial port can be used
to send and received data at any baud rate between 300-50K Baud.

5) 24-pin socket accommodates any 24-pin BASIC Stamp or Javelin Stamp
(both sold sepatately). This means that this PLC can do virtually
anything that your chosen Stamp can perform. Logic functions, numerical
computation, conditional branching, even non-volatile memory for
data-logging.

For ordering information and for complete specifications, please visit
this link: http://www.parallax.com/detail.asp?product_id=30064

Sincerely,

Erik Wood
ewood@p...
Parallax, Inc.
599 Menlo Dr. Ste. #100
Rocklin, CA 95765
www.parallax.com

Comments

  • ArchiverArchiver Posts: 46,084
    edited 2003-09-25 22:52
    Hi Jack,

    I ran a test and it works fine on our end.
    If you're using less than Netscape v6.0 that may be the problem.

    I'll email the documentation to you off list and see if there are any
    other possible errors.

    Thanks,

    Erik Wood
    ewood@p...
    Parallax, Inc.
    599 Menlo Dr., Suite #100
    Rocklin, CA 95765
    (916) 624-8003 Fax
    (888) 512-1024
    www.parallax.com


    Original Message
    From: goflo@p... [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=15vXqB1X4O0C6ssPCC0cZVRmCVRtK9hUjSPoBcn8tIHirXkb9lL6IA4A4s_WBCl2RNLBp4qNDjyxRg]goflo@p...[/url
    Sent: Thursday, September 25, 2003 3:35 PM
    To: basicstamps@yahoogroups.com
    Subject: Re: [noparse][[/noparse]basicstamps] Parallax - New! Stamp PLC


    Hi Eric -

    The link you mention works, but once you get there
    the pdf link to specs does'nt. Looks like a great
    product.

    Jack

    > For ordering information and for complete specifications, please visit

    > this link: http://www.parallax.com/detail.asp?product_id=30064


    To UNSUBSCRIBE, just send mail to:
    basicstamps-unsubscribe@yahoogroups.com
    from the same email address that you subscribed. Text in the Subject
    and Body of the message will be ignored.


    Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/




    This message has been scanned by WebShield. Please report SPAM to
    abuse@p....
  • ArchiverArchiver Posts: 46,084
    edited 2003-09-25 23:35
    Hi Eric -

    The link you mention works, but once you get there
    the pdf link to specs does'nt. Looks like a great
    product.

    Jack

    > For ordering information and for complete specifications, please visit
    > this link: http://www.parallax.com/detail.asp?product_id=30064
  • ArchiverArchiver Posts: 46,084
    edited 2003-09-26 04:27
    Oops - I'm stuck in the techno mud. Thanks for your efforts.
    Time for an upgrade!

    best regards, Jack

    Erik Wood wrote:
    >
    > Hi Jack,
    >
    > I ran a test and it works fine on our end.
    > If you're using less than Netscape v6.0 that may be the problem.
    >
    > I'll email the documentation to you off list and see if there are any
    > other possible errors.
  • ArchiverArchiver Posts: 46,084
    edited 2003-09-26 18:22
    Erik,

    Is there a larger picture available than the little bitty one on the
    website?

    amg

    On Thu, 25 Sep 2003 14:05:54 -0700 "Erik Wood" <ewood@p...>
    writes:
    > *****************************
    > New! Stamp PLC
    > #30064 $199
    > *****************************
    >
    > Hello Everyone,
    >
    > Parallax has teamed up with Lawicel HB of Sweden to present you with
    > an
    > industrial solution; the Stamp PLC. The Stamp PLC is a Program
    > Logic
    > Controller that is perfectly sized (and priced) for automating
    > small
    > machines. This merging of expertise has delivered a PLC that is
    > ideal
    > for the small-scale PLC market. A 24-pin BASIC Stamp or Javelin
    > Stamp is
    > required (sold separately).

    ________________________________________________________________
    The best thing to hit the internet in years - Juno SpeedBand!
    Surf the web up to FIVE TIMES FASTER!
    Only $14.95/ month - visit www.juno.com to sign up today!
  • ArchiverArchiver Posts: 46,084
    edited 2003-09-26 18:31
    Hi amg,

    Yes, here is a larger picture
    http://www.parallax.com/images/prod_jpg/30064_3views.jpg


    Note on finding larger images at www.parallax.com

    We maintain larger images of nearly all products on the web site. In
    order to find the picture, you must access the product via the product
    search function "Products & Part #'s". If you click on the "Go" button
    without even entering information in the field box, you'll find nearly
    400 products. By clicking on each individual thumb image that is
    presented in the search results, you will see a large jpg image.

    Enjoy,

    Erik Wood
    ewood@p...
    Parallax, Inc.
    599 Menlo Dr., Suite #100
    Rocklin, CA 95765
    (916) 624-8003 Fax
    (888) 512-1024
    www.parallax.com


    Original Message
    From: amg amg [noparse]/noparse]mailto:[url=http://forums.parallaxinc.com/group/basicstamps/post?postID=tWcfZRab956b1i4uYdCCDeUtaBp2GxTLtDsrdwPYX4cEFP9OEAT7udJ83iWkG4YqlkizwahK5IzamHAxL3iZ_noZmg]controlsdude2000@j...[/url
    Sent: Friday, September 26, 2003 10:22 AM
    To: basicstamps@yahoogroups.com
    Subject: Re: [noparse][[/noparse]basicstamps] Parallax - New! Stamp PLC


    Erik,

    Is there a larger picture available than the little bitty one on the
    website?

    amg

    On Thu, 25 Sep 2003 14:05:54 -0700 "Erik Wood" <ewood@p...>
    writes:
    > *****************************
    > New! Stamp PLC
    > #30064 $199
    > *****************************
    >
    > Hello Everyone,
    >
    > Parallax has teamed up with Lawicel HB of Sweden to present you with
    > an
    > industrial solution; the Stamp PLC. The Stamp PLC is a Program
    > Logic
    > Controller that is perfectly sized (and priced) for automating
    > small
    > machines. This merging of expertise has delivered a PLC that is
    > ideal
    > for the small-scale PLC market. A 24-pin BASIC Stamp or Javelin
    > Stamp is
    > required (sold separately).

    ________________________________________________________________
    The best thing to hit the internet in years - Juno SpeedBand! Surf the
    web up to FIVE TIMES FASTER! Only $14.95/ month - visit www.juno.com to
    sign up today!

    To UNSUBSCRIBE, just send mail to:
    basicstamps-unsubscribe@yahoogroups.com
    from the same email address that you subscribed. Text in the Subject
    and Body of the message will be ignored.


    Your use of Yahoo! Groups is subject to
    http://docs.yahoo.com/info/terms/




    This message has been scanned by WebShield. Please report SPAM to
    abuse@p....
Sign In or Register to comment.